高效柔性钙钛矿太阳电池研究
RESEARCH ON EFFICIENT AND FLEXIBLE PEROVSKITE SOLAR CELLS
白建明 1于越 1李治学 1彭飞1
作者信息
- 1. 华电重工股份有限公司,北京 100071
- 折叠
摘要
对柔性钙钛矿太阳电池(FPSCs)成膜工艺进行研究,针对在柔性基底上沉积薄膜不均匀、较多缺陷、内部应力等问题,分析其形成原因和影响因素.选择PET/ITO作为柔性基底,SnO2作为电子传输层,加入KCl进行调控,KCl的加入可增加电子传输层与柔性导电基底的亲和性,从而获得致密且缺陷较少的膜层.通过优选钙钛矿前驱体各组分配比,加入MACl作为添加剂调控结晶过程,并在钙钛矿表面设计PEAI钝化层钝化界面,获得高质量的钙钛矿结晶和致密表面,并使电池的柔韧性能得到提升.在适宜的环境下,制备认证效率达到23.14%的柔性钙钛矿太阳电池,其在弯折10000次后仍能保持80.48%的初始光电转换效率.
Abstract
This article studies the film-forming process of flexible perovskite solar cells(FPSCs),and analyzes the reasons and influencing factors for the uneven deposition of thin films,numerous defects,and internal stress on flexible substrates.PET/ITO is selected as the flexible substrate,SnO2 as the electron transport layer,and KCL is introduced for regulation.The introduction of KCl increases the affinity between the electron transport layer and the flexible conductive substrate,resulting in a dense and defect free film layer.By optimizing the distribution ratio of perovskite precursors,introducing MACl as an additive to regulate the crystallization process,and designing a PEAI passivation layer passivation interface on the surface of perovskite,high-quality perovskite crystals and dense surfaces are obtained,and the flexibility performance of the device is improved.In a suitable environment,a flexible perovskite cell with a certified efficiency of 23.14%was prepared,and the initial conversion efficiency of 80.48%can still be maintained after 10000 time bends.
关键词
钙钛矿太阳电池/柔性/成膜工艺/制备环境Key words
perovskite solar cells/flexibility/film forming process/preparation environment引用本文复制引用
基金项目
华电重工科技项目(HHI-KJ-2022-01)
出版年
2024
NETL
NSTL
万方数据