首页|回归再时效热处理对7046铝合金显微组织与性能的影响

回归再时效热处理对7046铝合金显微组织与性能的影响

扫码查看
原文链接
  • NETL
  • NSTL
  • 万方数据
采用室温拉伸试验、极化曲线测试、透射电镜(TEM)等分析方法,研究了回归再时效(RRA)热处理过程中回归温度、回归时间对7046铝合金组织和性能的影响.结果表明,适当的RRA工艺可使合金具有良好的耐腐蚀性能,强度上也不低于T6态合金.经120℃×24 h预时效+180℃×15 min回归+120℃×24 h再时效的RRA工艺处理后,合金综合力学性能达到最优,抗拉强度、屈服强度分别为490.3 MPa、467.8 MPa,高于T6态的487.1 MPa、452.7 MPa;同时耐腐蚀性能也有了显著的提升,自腐蚀电流密度为8.616×10-7A/cm2,为T6态的18.9%.
Effects of Retrogression and Re-aging Treatment on Microstructure and Properties of 7046 Aluminum Alloy
Effects of retrogression temperature and time on microstructure and properties of 7046 aluminum alloy were investigated by means of tensile test,potentiodynamic polarization test and TEM observation.The results indicate that desirable corrosion resistance can be obtained after proper RRA treatment,and the strength is close to that of T6 treated ones.The optimal properties are achieved after pre-aging at 120℃for 24 h,followed by retrogression at 180℃for 15 min and re-aging at 120℃for 24 h,where the tensile strength and yield strength reach 490.3 MPa and 467.8 MPa,respectively,which are higher than those of the T6-treated ones(487.1 MPa and 452.7 MPa).More-over,the corrosion resistance is enhanced significantly,where the self-corrosion current density is 8.616×10-7 A/cm2,which is 18.9%of T6-treated specimens.

7046 Aluminum AlloyRetrogression and Re-agingMicrostructureMechanical PropertiesCorro-sion Resistance

黎凡夫、夏鹏、陈斌、项胜前、朱世安、张留艳、李润霞

展开 >

广东工业大学材料与能源学院,广州 510000

东莞理工学院材料科学与工程学院,东莞 523808

广东豪美新材股份有限公司,清远 511500

7046铝合金 回归再时效 显微组织 力学性能 耐腐蚀性能

国家自然科学基金资助项目国家自然科学基金资助项目广东省教育厅"创新强校工程"重点领域专项资助项目广东省基础与应用基础研究基金区域联合基金重点资助项目东莞市科技特派员资助项目

51974092520010732020ZDZX20582020B151512006520221800500212

2024

10.15980/j.tzzz.2024.03.018

特种铸造及有色合金
中国机械工程学会铸造分会

特种铸造及有色合金

CSTPCD北大核心
影响因子：0.481
ISSN：1001-2249
年,卷(期)：2024.44(3)
  • 18