AGM隔板的装配压力对阀控式铅酸蓄电池性能的影响
Influence of assembly pressure of AGM separator on the performance of VRLA lead-acid battery
成梓铭1
作者信息
- 1. 沈阳蓄电池研究所有限责任公司,沈阳 辽宁 110178
- 折叠
摘要
研究了 AGM 隔板的注液量、注液种类、纤维直径、增强隔板以及初始压力等因素对装配压力的影响.实验证明,注液量为饱和吸液量的 90%,装配压力控制在 60 kPa 左右,可以明显改善阀控式铅酸蓄电池的循环寿命.
Abstract
In this paper,the effects of injection amount,type of injection,fiber diameter,reinforced partition and initial pressure on the assembly pressure of AGM separator were studied.The experimental results show that the cycle life of valve-regulated lead-acid battery can be improved obviously when the injection volume is 90%of the saturated suction volume and the assembly pressure is controlled at about 60 kPa.
关键词
阀控式铅酸蓄电池/饱和吸酸量/AGM/隔板注液量/注液种类/纤维直径/初始压力/回弹性/装配压力Key words
valve-regulated lead-acid battery/saturated acid absorption/AGM/separator/the amount of liquid injection/type of liquid injection/fiber diameter/initial pressure/resilience/assembly pressure引用本文复制引用
出版年
2024
NETL
NSTL
万方数据