首页|ZnO-CuO负载ZSM-5催化CO2与环氧丙烷环加成反应的研究

ZnO-CuO负载ZSM-5催化CO2与环氧丙烷环加成反应的研究

ZnO-CuO loaded ZSM-5 in catalyzing cycloaddition between CO2 and propylene oxide

扫码查看
采用共沉淀浸渍法制备了以ZSM-5分子筛为载体的ZnO-CuO/ZSM-5催化剂,利用XRF、XRD、XPS、BET、SEM、TEM、NH3-TPD、CO2-TPD对催化剂进行表征.探究了 ZnO-CuO/ZSM-5在无溶剂、无助剂条件下对环氧丙烷与二氧化碳环加成反应的影响.结果表明,当反应温度为130℃、二氧化碳压力为3 MPa、反应时间为10 h、催化剂质量为环氧丙烷质量的4%时,催化活性达到最高,即环氧丙烷的转化率为81.64%,碳酸丙烯酯的选择性为90.11%;催化剂循环使用5次后仍具有良好的催化性能.
ZnO-CuO/ZSM-5 catalyst is prepared via coprecipitation impregnation method with ZSM-5 molecular sieve as the carrier,and characterized by means of XRF,XRD,XPS,BET,SEM,TEM,NH3-TPD and CO2-TPD.The influences of ZnO-CuO/ZSM-5 catalyst on the cycloaddition reaction between propylene oxide and carbon dioxide are investigated without the existence of solvent and promoter.It is indicated that the catalytic activity reaches the highest with a propylene oxide conversion of 81.64%,and a propylene carbonate selectivity of 90.11%when reaction temperature is 130℃,carbon dioxide pressure is 3 MPa,reaction time is 10 h,and the dosage of catalyst is 4%of the mass of propylene oxide.The catalyst remains good catalytic performance after having been recycled for 5 times.

ZSM-5 molecular sieveCO2propylene carbonatecycloaddition reactionheterogeneous catalyst

史博林、郭豹、李文松、刘继东、吕建华

展开 >

河北工业大学化工学院,天津 300131

河北工业大学过程工业安全研究中心,天津 300131

ZSM-5分子筛 二氧化碳 金属氧化物 环加成反应 非均相催化剂

2024

现代化工
中国化工信息中心

现代化工

CSTPCD北大核心
影响因子:0.553
ISSN:0253-4320
年,卷(期):2024.44(12)