一种烟叶自动打包机的设计与压板结构优化
Design and structure optimization of an automatic tobacco packaging machine
赵彦淇 1周元华 1廖婧 1周鑫杰 1冯亮1
作者信息
- 1. 长江大学 机械工程学院,湖北 荆州 434023
- 折叠
摘要
针对烟叶包装过程中存在的烟叶自身体积大、包装设备的自动化程度低、过程复杂等问题,设计了一款烟叶自动打包机装置,并对烟叶打包机最容易发生损伤的烟叶压板进行模拟仿真.基于SolidWorks三维建模软件绘制打包机所需要的三大结构,对液压系统做了相关计算以及设计液压系统原理图;应用ANSYS Workbench响应面优化模块对烟叶压板的结构进行优化,其最大等效应力由99.381 MPa减小到82.338 MPa,减小率为17.15%,最大变形由0.1230 mm减小到0.1132 mm,减小率为7.9%.
Abstract
Aiming at the problems of large volume of tobacco leaves,low degree of automation,and complicated process in the tobacco packaging process,an automatic tobacco packing machine was designed,and the tobacco leaf pressing plate,which is most frequently damaged,was simulated.Based on the SolidWorks 3D modeling software,the three major structures of the packaging machine were drawn,the relevant calculation was made on the hydraulic system,and the schematic diagram of the hydraulic system was designed.The response surface optimization module of ANSYS Workbench was used to optimize the structure of the tobacco leaf pressing plate.The maximum equivalent stress was reduced from 99.381 MPa to 82.338 MPa,with a reduction rate of 17.15%,and the maximum deformation was reduced from0.1230 mm to0.1132 mm,with a reduc-tion rate of 7.9%.
关键词
烟叶打包机/自动化/PLC/响应面优化Key words
tobacco packaging machine/automation/PLC/response surface optimization引用本文复制引用
出版年
2024
NETL
NSTL
万方数据