家用多管道水流控制装置设计
Design of Household Multi-Pipe Water Flow Control Device
肖志玲 1张玉浩 2王爱民 2王崇占 2刘博 3李建涛 2白家帅 2黄剑坡 2张莉4
作者信息
- 1. 天津大学 材料科学与工程学院,天津 300350;郑州轻工业大学 机电工程学院,郑州 450002
- 2. 郑州轻工业大学 机电工程学院,郑州 450002
- 3. 思进智能成形装备股份有限公司,宁波 315048
- 4. 郑州科技学院 机械工程学院,郑州 450064
- 折叠
摘要
在水处理领域,管路铺设和流向控制至关重要.合理的管路铺设和流向控制,能够节省空间、实现集中控制和满足多样化安装场景需求.为此,设计一款多管道水流控制装置,实现水处理设备管路间的协同作业.首先,根据不同管路需求,采用Solidworks软件设计多管道水流控制装置.其次,利用Inspire有限元分析软件进行流体仿真,得出 80 s前参数变化较大、80 s后水流趋向稳定的分布规律.最后,运用增材制造技术打印出相关零部件并进行装配,进行通流检验,验证设计的可行性.
Abstract
In the field of water treatment,piping and flow control are crucial.Proper pipe laying and flow direction control can save space,implement centralized control,and meet diverse installation scenarios.Therefore,a multi-pipe water flow control device is designed to realize the cooperative operation between the pipes of water treatment equipment.First,according to different pipeline requirements,the multi-pipeline flow control device is designed using Solidworks software.Secondly,Inspire finite element analysis software is used for fluid simulation,and the distribution law of water flow tends to be stable after 80 s while the parameters changed greatly before 80 s.Finally,the additive manufacturing technology is used to print out the relevant parts and assemble them,and then the flow test is carried out to verify the feasibility of the design.
关键词
管路铺设/流向控制/流体仿真/增材制造/水处理Key words
pipeline laying/flow direction control/fluid simulation/additive manufacturing/water treatment引用本文复制引用
基金项目
河南省重点研发专项(231111231200)
河南省科技攻关项目(242102240121)
出版年
2024
NETL
NSTL
万方数据