桥丝式电火工品感应电流及电磁安全性分析
Analysis of Induced Current and Electromagnetic Safety of Bridge-Wire Electric Explosive Device
朱晓楠 1潘进 1杨进候 1王凯国 1林小川1
作者信息
- 1. 中国船舶集团有限公司第七〇五研究所,陕西西安,710077
- 折叠
摘要
基于电磁场基本理论对桥丝式电引爆火工品等效天线的形成及其能量转化过程进行理论分析,利用CST软件对强电磁脉冲作用下火工品中感应电流的形成进行仿真建模,并利用验证后的模型分析了入射波信号、火工品引线布置形式及桥丝电阻等因素对感应电流的影响.研究结果表明,入射波强度、频率、入射方向以及火工品等效天线的感应接收面积是感应电流的主要决定因素;桥丝电阻和感应电流共同决定了耦合到火工品中的感应能量,从电磁安全性角度出发,电火工品承受连续电磁脉冲作用时间不得超过 178 μs.文中研究可为武器装备火工品安全防护提供参考.
Abstract
Based on the basic theory of electromagnetic fields,the formation of the equivalent antenna of an electric explosive device(EED)and its energy conversion process were analyzed,and CST software was used to simulate and model the formation of induced current in the EED under the action of strong electromagnetic pulses.After validating the model,the influence of factors such as incident wave signal,lead wire layout,and bridge-wire resistance on the induced current was studied.According to the results,the strength,frequency,and the direction of incident wave,as well as the inductive receiving area of the equivalent antenna of the EED were major factors determining induced current.Bridge-wire resistance and induced current jointly determine the induced energy coupled to the EED.From the perspective of electromagnetic safety,the duration of continuous electromagnetic pulse action on EED shall not exceed 178 μs.The research content has certain reference significance for the safety protection of EEDs in weapon systems.
关键词
电引爆火工品/桥丝电阻/等效天线/电磁脉冲/安全防护Key words
electric explosive device/bridge-wire resistance/equivalent antenna/electromagnetic pulse/safety protection引用本文复制引用
出版年
2024
国家科技期刊平台
NSTL
万方数据