首页|低流阻全外压平衡型膨胀节压降仿真计算

低流阻全外压平衡型膨胀节压降仿真计算

扫码查看
原文链接
  • 国家科技期刊平台
  • NETL
  • NSTL
  • 万方数据
蒸汽管道温度高、敷设距离长,常采用补偿器补偿管道的热膨胀量.本文针对旁通直管压力平衡型膨胀节在压降上的不足,提出了一种DN500低流阻全外压平衡型膨胀节,采用Fluent软件对其压降进行计算,分析流体流通面积比和流体流向转变角度对其压降的影响.结果表明,当流体流通面积比为2.35,流体流向转变角度为25°～40°时,减阻效果最佳,且优于旋转补偿单元.根据仿真数据,拟合得到DN500低流阻全外压平衡型膨胀节的压降计算公式,能够快速进行压降计算,为实际工程应用提供理论依据.
Simulation calculation of pressure drop of low flow resistance and full external pressure balanced expansion joint
The temperature of the steam pipeline is high and the laying distance is long,and the compensator is often used to compensate for the thermal expansion of the pipeline.In view of the lack of pressure drop in bypass straight pipe pressure balanced expansion joint,a DN500 low flow resistance and full external pressure balanced expansion joint was proposed,and the pressure drop was calculated by using Fluent software,and the influence of the fluid flow area ratio and the fluid flow direction transition angle on its pressure drop was analyzed.The results show that when the fluid flow area ratio is 2.35 and the fluid flow direction transition angle is 25°～40°,the drag reduction effect is the best,and is better than that of the rotation compensation unit.According to the simulation data fitting,the pressure drop calculation formula of DN500 low flow resistance and full external pressure balanced expansion joint is obtained,which can quickly calculate the pressure drop and provide a theoretical basis for practical engineering application.

low flow resistance and full external pressure balanced expansion jointpressure drop calculationflow area ratioangle at which fluid flows to transition

黄诗雯、余威、杨玉强、张璐杨、付贝贝、田明明、闫廷来

展开 >

中船双瑞(洛阳)特种装备股份有限公司,河南洛阳 471000

中国船级社 武汉分社,武汉 430000

低流阻全外压平衡型膨胀节 压降计算 流通面积比 流体流向转变角度

洛阳市重大科技创新专项中国船舶集团有限公司自立科技创新项目高技术船舶科研项目

2301018A202112ZZCBG3N21-2-5

2024

10.3969/j.issn.1001-4837.2024.06.010

压力容器
中国机械工程学会压力容器分会

压力容器

CSTPCD北大核心
影响因子：1.384
ISSN：1001-4837
年,卷(期)：2024.41(6)
  • 14