有色冶金设计与研究2024,Vol.45Issue(6) :80-83.

基于移动床生物膜工艺的污水处理厂改造应用

Renovation and Application of Sewage Plant Based on Moving Bed Biofilm Reactor Process

魏巍
有色冶金设计与研究2024,Vol.45Issue(6) :80-83.

基于移动床生物膜工艺的污水处理厂改造应用

Renovation and Application of Sewage Plant Based on Moving Bed Biofilm Reactor Process

魏巍1
扫码查看

作者信息

  • 1. 中国瑞林工程技术股份有限公司,江西南昌 330038
  • 折叠

摘要

基于某污水处理厂的改造工程,探讨了移动床生物膜(MBBR)工艺在实际应用中的效果.针对该厂面临的水质波动、设备老化及处理能力不足等问题,研究提出实施原位改造策略,通过更换细格栅、采用AAO+MBBR工艺、优化主要构筑物设计参数的方式对该污水处理厂进行了升级改造.其中,MBBR工艺通过投加悬浮载体,利用载体表面生物膜强化生化处理,显著提高了系统的抗冲击负荷能力和处理效率.改造后,污水厂出水水质满足一级A标准,且占地面积和运营成本得到有效控制.

Abstract

Based on the renovation project of a certain sewage treatment plant,the paper discusses the effectiveness of the Moving Bed Biofilm Reactor(MBBR)process in practical application.In response to the problems faced by the plant,such as water quality fluctuations,equipment aging,and insufficient treatment capacity,a in-situ renovation strategy was proposed in the study.The sewage treatment plant was upgraded and renovated by replacing the fine grille,adopting the AAO+MBBR process,and optimizing the design parameters of the main structures.Among them,the MBBR process significantly improved the system's ability to withstand impact loads and processing efficiency by adding suspended carriers and utilizing biofilm on the carrier surface to enhance biochemical treatment.After the renovation,the quality of water treated from the sewage treatment plant meets the class-1 A standard,and the land area and operating costs are effectively controlled.

关键词

污水处理/生化处理/移动床生物膜/原位改造/细格栅

Key words

sewage treatment/biochemical treatment/moving bed biofilm reactor(MBBR)/In-situ renovation/fine grille

引用本文复制引用

出版年

2024
有色冶金设计与研究
中国瑞林工程技术有限公司

有色冶金设计与研究

影响因子:0.414
ISSN:1004-4345
段落导航相关论文