首页|断控型缝洞气藏酸压规模与无阻流量的关系研究

断控型缝洞气藏酸压规模与无阻流量的关系研究

扫码查看
顺北二区发育典型的超深断控型缝洞储集体,由于钻井过程泥浆漏失量大,通常选择酸压或是酸洗完井作为解堵增产措施.为了研究酸液用量和酸压规模对无阻流量的影响,研究基于顺北二区地质特征,建立了钻遇裂缝(漏失井)和未钻遇裂缝两种情况的数值模型,利用裂缝扩展—气藏数值模拟方法,对两种情况井的酸压缝形态进行了模拟,进一步模拟了两种地质条件和不同酸压规模下的气井早期无阻流量,并用现场数据进行了反演验证.对比结果发现,当气井钻遇裂缝带时,酸压可以提高气井无阻流量,但幅度不大,酸压的规模不宜过大;当气井未钻遇裂缝带时,酸压则可以明确大幅度提高气井无阻流量和控制储量.
The Relationship Study Between Acid-fracturing Scale and Open-flow Capacity in Fault-controlled Gas Reservoirs
The typical ultra-deep fault controlled fractured cave reservoir in 2nd Shunbei Block has been devel-oped.Due to the large amount of mud loss during drilling,acid fracturing and washing completion are usually cho-sen to remove blockages and stimulate production.In order to study the effects of acid fluid dosage and acid frac-turing scale on gas production capacity,numerical models were established based on the geological characteristics of 2nd Shunbei Block for drilling encountered fractures(leaking wells)and non-drilling encountered fractures.The fracture propagation gas reservoir numerical simulation method was used to simulate the acid fracturing fracture morphology of the two wells,further simulating the early production capacity of gas wells under two geological conditions and different acid fracturing scales,and conducting inversion verification with on-site data.The compar-ison results show that when a gas well encounters a fractured zone during drilling,acid fracturing can increase the production capacity of the gas well,but the amplitude is not significant.The scale of acid fracturing should not be too large;When a gas well does not encounter a fractured zone during drilling,acid fracturing can significantly in-crease the production capacity and control reserves of the gas well.

fault-controlled reservoirgas reservoirleaking wellnumerical simulationinverse statistics

王龙、万小勇、林仁奎、李冬梅、徐燕东、朱苏阳

展开 >

中国石油化工集团公司碳酸盐岩缝洞型油藏提高采收率重点实验室

中国石油化工股份有限公司西北油田分公司

中国石油西南油气田公司开发事业部

西南石油大学石油与天然气工程学院

展开 >

断控型 气藏 漏失井 数值模拟 反演统计

2024

钻采工艺
四川石油管理局钻采工艺技术研究院,西南油气田分公司采气工程研究院

钻采工艺

北大核心
影响因子:0.634
ISSN:1006-768X
年,卷(期):2024.47(5)