自动化与仪器仪表2024,Issue(4) :211-215.DOI:10.14016/j.cnki.1001-9227.2024.04.211

基于电子信息技术的电器电磁机构设计

Design of Electrical Electromagnetic Mechanisms Based on Electronic Information Technology

张雪敏 谷力
自动化与仪器仪表2024,Issue(4) :211-215.DOI:10.14016/j.cnki.1001-9227.2024.04.211

基于电子信息技术的电器电磁机构设计

Design of Electrical Electromagnetic Mechanisms Based on Electronic Information Technology

张雪敏 1谷力1
扫码查看

作者信息

  • 1. 西安思源学院,西安 710038
  • 折叠

摘要

电器电磁机构作为电磁技术的重要组成部分,其设计和应用对于提高电气设备的性能和功能至关重要.为进一步提升电器电磁机构的可靠性,研究使用了电子信息技术,提出了相应的电磁机构设计方案,并通过三相短路模型的构建,利用电弧能量模型等完成了动态开距结构优化.结果表明,在0.02~0.04 s之间,短路电弧功率变化十分显著且集中.短路分断实验中,所提出的动态开距技术对应短路电流峰值最大为26.34 kA,燃弧时间中,最小值仅为5.38 s,均在标准要求20 ms以下.以上结果验证了所设计的电器电磁机构具有较强的开断性能,实现了设备的高效保护,为电子信息技术和电磁学领域的研究和应用提供了参考.

Abstract

As an important component of point electromagnetic technology,the design and application of electrical electromagnet-ic mechanisms are crucial for improving the performance and functionality of electrical equipment.In order to further improve the reli-ability of the electromagnetic mechanism of electrical appliances,electronic information technology was used in the study,proposed the corresponding electromagnetic mechanism design scheme,and completed the optimization of the dynamic opening structure through the construction of three-phase short circuit model and arc energy model.The results indicate that the short-circuit arc power changes significantly and intensively between 0.02 and 0.04 seconds.In the short-circuit breaking experiment,the proposed dynam-ic opening distance technology corresponds to a maximum short-circuit current peak of 26.34 kA,and the minimum arcing time is on-ly 5.38 s,which is below the standard requirement of 20 ms.The above results verify that the electromagnetic mechanism of the elec-trical appliance designed has a strong breaking performance,realizes the efficient protection of the equipment,and provides a refer-ence for the research and application of electronic information technology and Electromagnetism.

关键词

电子信息/电器/电磁机构/动态开距/结构优化

Key words

electronic information/electrical appliances/electromagnetic mechanism/dynamic opening distance/structural op-timization

引用本文复制引用

基金项目

西安思源学院校级科研项目(XASYPY2-B2006)

出版年

2024
自动化与仪器仪表
重庆工业自动化仪表研究所,重庆市自动化与仪器仪表学会

自动化与仪器仪表

CSTPCD
影响因子:0.327
ISSN:1001-9227
参考文献量12
段落导航相关论文