首页|振动压路机的能量传递模型与作业参数优化研究

振动压路机的能量传递模型与作业参数优化研究

扫码查看
原文链接
  • 国家科技期刊平台
  • NETL
  • NSTL
  • 万方数据
为提高振动压路机作业过程的压实质量,研究了振动压路机的能量传递模型与作业参数优化.首先基于U-K方程建立"碾轮-被压实材料"的系统振动动力学模型,结合能量守恒提出振动压路机能量传递模型;然后以振动频率和压实速度作为寻优工作参数,构建路面压实质量的优化模型;最后通过案例验证证明了所提方法的可行性与有效性.结果表明:工作频率与被压实材料的固有频率比值保持在(√2)～2 范围内,可避免共振带来的影响;初始阶段低速碾压,材料性能稳定后提高碾压速度可保证高效压实,得出振动频率在 21.8～27 Hz、压实速度在 2.36～2.91 km/s范围内,可达到最优的压实效果.所提的能量传递模型、作业参数优化模型为保障振动压路机压实质量奠定了基础,为提高振动压路机压实质量和效率提供了参考.
Research on Energy Transfer Model and Optimisation of Operating Parameters of Vibratory Rollers
In order to improve the compaction quality of vibratory rollers,the energy transfer model of vibratory rollers and the optimisation of operating parameters were studied.Firstly,the sys-tem vibration dynamics model of"wheel-compacted material"was established based on the U-K equation,and the energy transfer model of vibratory roller was proposed in combination with energy conservation.Then,the vibration frequency and compaction speed were taken as the optimal working parameters to construct the optimisation model of road compaction quality.Finally,the feasibility and effectiveness of the proposed method were proved through case verification.The results show that:the ratio between the working frequency and the intrinsic frequency of the compacted material is kept within the range of(√2)～2 to avoid the effect of resonance.The initial stage of low-speed rolling,and after the material properties were stabilised,the rolling speed may be increased to ensure efficient compaction,which results in the vibration frequency in the range of 21.8～27 Hz and the compaction speed in the range of 2.36～2.91 km/s,to achieve the optimal compaction effectiveness.The proposed energy transfer model and operation parameter optimisation model lay a foundation for guaranteeing the compaction quality of vibratory rollers and provide a reference for improving the compaction quali-ty and efficiency of vibratory rollers.

vibration dynamicscompaction modeloptimum operating parametervibratory roller

惠记庄、骆伟、张泽宇、张军、王杰

展开 >

长安大学道路施工技术与装备教育部重点实验室,西安,710064

西藏天路股份有限公司,拉萨,850000

振动动力学 压实模型 最优作业参数 振动压路机

国家自然科学基金陕西省秦创原"科学家+工程师"队伍建设项目西藏自治区科技计划西藏自治区科技计划陕西省自然科学基金陕西省自然科学基金陕西省自然科学基金

522783902022KXJ-150XZ2019TL-G-02XZ202101ZR0044G2022JM-1722022JZ-262022JQ-515

2024

10.3969/j.issn.1004-132X.2024.03.016

中国机械工程
中国机械工程学会

中国机械工程

CSTPCD北大核心
影响因子：0.678
ISSN：1004-132X
年,卷(期)：2024.35(3)
  • 19