采用大变形本构模型预测热轧AISI316不锈钢厚板的轧制力
Prediction rolling force in hot rolling AISI316 stainless steel plate using a large-deformation constitutive model
曹金荣1
作者信息
- 1. 天津钢管制造有限公司技术中心,天津 300301
- 折叠
摘要
采用热扭转实验数据,建立了一个AISI316 钢大变形本构模型.根据建立的本构模型,采用三维有限元法模拟计算了AISI316钢热轧过程,并对计算的轧制力与实测的轧制力进行了分析.结果表明,在压下率 30%～50%之间,计算值比实测值低约 7%,在压下率为 65%时,计算值比实测值低约 12%,在工业应用范围内,采用确定的AISI316 钢大应变本构模型计算的轧制力具有较高的预测精度.
Abstract
A large deformation constitutive model of AISI316 steel was established based on the experimental data of hot torsion.According to the established constitutive model,the hot rolling process of AISI316 steel was simulated and calculated by the three-dimensional finite element method,analyzed the calculated rolling force and the measured rolling force.The results show that the calculated value is about 7%lower than the measured value at the reduction rate of 30%-50%.When the reduction rate is 65%,the calculated value is about 12%lower than the measured value.In the range of industrial applications,the rolling force calculated by the determined AISI316 steel large strain constitutive model has high prediction accuracy.
关键词
金属材料/AISI316钢/热轧/轧制力/本构模型/有限元模拟Key words
metallic materials/AISI316 steel/hot rolling/roll force/constitutive model/finite element simulation引用本文复制引用
出版年
2024
NETL
NSTL
万方数据