首页|Numerical simulation of granular silicon growth and silicon fines formation process in polysilicon fluidized bed

Numerical simulation of granular silicon growth and silicon fines formation process in polysilicon fluidized bed

扫码查看
原文链接
  • NETL
  • NSTL
  • 万方数据
Operating conditions strongly affect the yield and quality of polysilicon in a polysilicon fluidized bed.In this study,a new model of polysilicon fluidized bed was established using the Euler-Euler model coupled with population balance model(PBM),which was combined with fluid flow,heat,and mass transfer models,while considering the scavenging effect of silicon fines.The effects of different operating conditions on the deposition and formation rates of silicon fines were investigated.Results show that the model can correctly describe the particle growth process in the fluidized bed of polysilicon.The silicon fines and the interphase velocity difference show"N"-and"M"-shaped distributions along the axial direction,respectively.The particle temperature and concentration near the wall are higher than those in the central region.The decomposition of silane in the bottom region of the bed is dominated by het-erogeneous deposition.The scavenging of silicon fines occurs in the dilute-phase region.The effects of operating conditions,i.e.inlet gas temperature,silane composition,and gas velocity,on the reactor performance were also explored comprehensively.Increasing the inlet gas composition and velocity enhances the formation rates of solid silicon and fines.Increasing the inlet gas temperature promotes the growth of solid silicon and inhibits the formation of silicon fines.High fluidization ratio,low inlet silane concentration,and high inlet gas temperature enhance the selectivity of silicon growth.

Polysilicon fluidized bedParticle growthFinesCFDPopulation balance model(PBM)

Guangkai Gu、Guoqiang Lv、Wenhui Ma、Shanlin Du、Boqiang Fu

展开 >

Faculty of Metallurgical and Energy Engineering,Kunming University of Science and Technology,Kunming 650093,China

State Key Laboratory of Complex Nonferrous Metal Resources Cleaning Utilization in Yunnan Province,Kunming 650093,China

Science and Technology Planning Project of the Science and Technology Department of Yunnan ProvinceScience and Technology Planning Project of the Science and Technology Department of Yunnan Province

202002AB080002202202AB080014

2024

10.1016/j.partic.2023.07.019

颗粒学报(英文版)
中国颗粒学会　中国科学院过程工程研究所

颗粒学报(英文版)

CSTPCD
影响因子：0.632
ISSN：1674-2001
年,卷(期)：2024.87(4)
  • 35