首页|固态发酵三七渣产灵芝三萜的工艺条件优化

固态发酵三七渣产灵芝三萜的工艺条件优化

扫码查看
该研究通过单因素试验考察发酵温度、接种量、发酵时间对固态发酵三七渣生产灵芝三萜的影响,并采用响应面法对其发酵工艺条件进行优化。结果表明,发酵温度、接种量、发酵时间对灵芝三萜含量影响均极显著(P<0。01),这3个因素对于发酵培养物中灵芝三萜含量影响程度排序为:接种量>发酵时间>发酵温度。发酵温度和接种量之间的交互作用对灵芝三萜含量的影响极显著(P<0。01);而接种量和发酵时间、发酵时间和发酵温度之间的交互作用对灵芝三萜含量的影响不显著(P>0。05)。在实验室小试条件下最佳发酵工艺条件为:发酵温度30 ℃,发酵时间16 d,接种量为11%。在此优化条件下,灵芝三萜含量为(4。110±0。186)mg/g,比优化前提高了 12。0%。
Optimization of process conditions for Ganoderma lucidum triterpenes production from Panax notoginseng residues by solid-state fermentation
The effects of fermentation temperature,inoculum and fermentation time on Ganoderma lucidum triterpenes production from Panax noto-ginseng residues by the solid-state fermentation were investigated by the single factor tests,and the fermentation process conditions were optimized by response surface method.The results showed that the effects of fermentation temperature,inoculum and fermentation time on G.lucidum triter-penes content were all greatly significant(P<0.01).The effects of the 3 factors on G.lucidum triterpenes content in fermentation culture were ranked as follows:inoculum>fermentation time>fermentation temperature.The interaction between fermentation temperature and inoculum had greatly significant influence on G.lucidum triterpenes content(P<0.01),the effects of interaction between inoculum and fermentation time,and fermentation time and temperature on G.lucidum triterpenes content were not significant(P>0.05).The optimum fermentation conditions in the laboratory were as follows:fermentation temperature 30 ℃,time 16 d,and inoculum 11%.Under these optimal conditions,the G.lucidum triterpenes content was(4.110±0.186)mg/g,which was 12%higher than that before optimization.

Panax notoginseng residuesGanoderma lucidum triterpenoidssolid-state fermentationprocess optimizationresponse surface method

谭显东、蔡坤佑、王浪、邹健、陈星颖、陈香楚

展开 >

成都信息工程大学资源环境学院,四川成都 610225

三七渣 灵芝三萜 固态发酵 工艺优化 响应面法

四川省重点研发计划项目

2021YFG0263

2024

中国酿造
中国调味品协会 北京食品科学研究院

中国酿造

CSTPCD北大核心
影响因子:0.759
ISSN:0254-5071
年,卷(期):2024.43(9)