The properties of the joints are dictated by the nature, distribution, and morphology of the phases formed at the interface. The mechanical properties of brazed joints are well documented in the literature, contrarily to their electrochemical behaviour. Thus, the main objective of this study was to understand the influence of the phases formed at the interface on the corrosion behaviour of commercially pure Ti brazed joints, produced by using TiCuNi, eutectic AgCu, and Ag filler foils. The electrochemical behaviour of the Ti joints was accessed by open circuit potential and potentiodynamic polarization tests in phosphate buffer saline solution electrolyte at body temperature. Results showed that Ag-based fillers induced susceptibility to micro-galvanic corrosion between the Ag-rich and Ti phases formed at the interface and commercially pure Ti base metal. However, no significant differences were observed between the joint system and the base material when brazing with TiCuNi filler.
CMEMS-UMinho, Center of MicroElectroMechanical Systems, University of Minho, Guimarães, Portugal
IBTN/Euro, European Branch of the Institute of Biomaterials, Tribocorrosion and Nanomedicine,Department of Mechanical Engineering, University of Minho, Guimarães, Portugal
Department of Mechanical Engineering, University of Minho, Guimarães, Portugal
生物材料 钛 连接 钎焊合金 界面 显微组织 腐蚀
This work was supported by Portuguese FCT,under the reference projectThis work was supported by Portuguese FCT,under the reference project
NETL
NSTL
万方数据
维普
