中国造纸2024,Vol.43Issue(1) :131-140.DOI:10.11980/j.issn.0254-508X.2024.01.016

不同助留体系对装饰原纸二氧化钛复合填料留着效果的影响

Retention Results of Retention Systems on Titanium Dioxide Composite Filler in Preparing Decorative Base Paper

张妍 王慧乐 乔文朴 王一凡 刘忠 吴海标
中国造纸2024,Vol.43Issue(1) :131-140.DOI:10.11980/j.issn.0254-508X.2024.01.016

不同助留体系对装饰原纸二氧化钛复合填料留着效果的影响

Retention Results of Retention Systems on Titanium Dioxide Composite Filler in Preparing Decorative Base Paper

张妍 1王慧乐 2乔文朴 2王一凡 2刘忠 3吴海标4
扫码查看

作者信息

  • 1. 天津科技大学天津市制浆造纸重点实验室,天津,300457;浙江科技大学环境与资源学院,浙江杭州,310023;杭州华旺新材料科技股份有限公司,浙江杭州,311305
  • 2. 浙江科技大学环境与资源学院,浙江杭州,310023
  • 3. 天津科技大学天津市制浆造纸重点实验室,天津,300457
  • 4. 杭州华旺新材料科技股份有限公司,浙江杭州,311305
  • 折叠

摘要

本研究分别分析了单元助留体系阳离子聚酰胺环氧氯丙烷树脂(PAE),双元助留体系PAE/阴离子聚丙烯酰胺(APAM)、PAE/膨润土(MMT)、PAE/阳离子聚丙烯酰胺(CPAM),三元助留体系PAE/CPAM/APAM、PAE/CPAM/MMT对装饰原纸TiO2/滑石粉复合填料留着效果的影响.确定了各个体系的最佳添加量,并筛选出助留效果最好的助留体系.结果表明,当PAE添加量2.0%、CPAM添加量0.08%、MMT添加量0.6%时,组成的PAE/CPAM/MMT三元助留体系留着效果最佳,此时,浆料和填料留着率分别为89.5%和65.0%,纸张的不透明度、白度及匀度分别为98.5%、86.6%和 91.

Abstract

In this paper,the retention results of retention systems such as cationic polyamide epichlorohydrin resin(PAE),PAE/anionic polyacrylamide(APAM),PAE/bentonite(MMT),PAE/cationic polyacrylamide(CPAM),PAE/CPAM/APAM,and PAE/CPAM/MMT on retention rate of titanium dioxide/talc composite filler in preparing decorative base paper were studied,and the optimal dosage of each system was determined.The results showed that when the dosage of PAE,CPAM,and MMT were 2.0%,0.08%,and 0.6%respectively,ternary reten-tion system of PAE/CPAM/MMT had the best retention results,the retention rates of pulp and filler were 89.5%and 65.0%,respectively,and the opacity,whiteness,and formation of the paper were 98.5%,86.6%,and 91,respectively.

关键词

填料留着率/单元助留体系/双元助留体系/三元助留体系

Key words

filler retention rate/unary retention system/binary retention system/ternary retention system

引用本文复制引用

基金项目

浙江省自然科学基金(LQ23C160001)

出版年

2024
中国造纸
中国造纸学会 中国制浆造纸研究院

中国造纸

北大核心
影响因子:0.525
ISSN:0254-508X
参考文献量16
段落导航相关论文