首页|浸渍热压工艺对碳纸结构性能的影响及机理研究

浸渍热压工艺对碳纸结构性能的影响及机理研究

扫码查看
本研究通过探究碳纸浸渍和固化过程中酚醛树脂的分布及形态结构,研究浸渍热压工艺对碳纸性能的影响.结果表明,当浸渍时间为4 min,浸渍液浓度为11%时,预固化后碳纸中所含的树脂最多,浸渍量可达154.9%.当热压温度为160℃,热压时间为20 min,热压压力为3.0 MPa时,制备的碳纸热压纸性能最好,电阻率仅27.1 mΩ·cm,抗张强度达103.9 N/cm.
Study on the Effect and Mechanism of Impregnation and Hot Pressing Process on the Structures and Properties of Carbon Paper
The phenolic resin distribution and morphological structure during the impregnation and curing process of carbon paper were studied,exploring the effect of impregnation and hot pressing process on the properties of carbon paper.The results showed that the maximum impregnation increment of phenolic resin for pre-impregnated carbon paper was up to 154.9%when the impregnation time and phenolic resin concentration were 4 min and 11%,respectively.The prepared carbon paper after hot-pressed had the best performance when the hot pressing temperature,time and pressure were 160 ℃,20 min and 3.0 MPa,respectively,of which the resistivity and tensile strength of carbon paper were 27.1 mΩ·cm and 103.9 N/cm,respectively.

carbon paperimpregnationhot pressingconductivitytensile strength

吴锦涵、沙力争、赵会芳、吴俊怡、苑田忠、孙倩玉、郭大亮

展开 >

浙江科技大学环境与资源学院,浙江杭州,310023

碳纸 浸渍 热压 导电性 抗张强度

浙江省"尖兵""领雁"研发攻关计划

2022C01066

2024

中国造纸
中国造纸学会 中国制浆造纸研究院

中国造纸

北大核心
影响因子:0.525
ISSN:0254-508X
年,卷(期):2024.43(3)
  • 19