中国造纸2024,Vol.43Issue(8) :39-45.DOI:10.11980/j.issn.0254-508X.2024.08.005

姜黄素修饰CNC传感器与水凝胶制备及其检测和去除Pb2+的研究

Preparation of Curcumin Modified CNC Sensor and Hydrogel and Its Detection and Removal of Pb2+

刘艳华 徐保松 杨家川 宋泽华
中国造纸2024,Vol.43Issue(8) :39-45.DOI:10.11980/j.issn.0254-508X.2024.08.005

姜黄素修饰CNC传感器与水凝胶制备及其检测和去除Pb2+的研究

Preparation of Curcumin Modified CNC Sensor and Hydrogel and Its Detection and Removal of Pb2+

刘艳华 1徐保松 2杨家川 3宋泽华2
扫码查看

作者信息

  • 1. 濮阳医学高等专科学校,河南濮阳,457000
  • 2. 濮阳市农业农村局,河南濮阳,457000
  • 3. 山西大同大学,山西大同,037009
  • 折叠

摘要

本研究利用EDC/NHS耦合法将姜黄素(Cur)接枝于羧基化纤维素纳米晶体(CCNC),制备纳米纤维素接枝姜黄素(CCNC-Cur)传感器和CCNC-Cur复合海藻酸钠(CCNC-Cur-SA)水凝胶吸附剂,用于检测和去除Pb2+.结果表明,CCNC-Cur传感器可特异性吸附Pb2+,利用ImageJ软件对传感器的颜色深度进行数字化处理后,得到Pb2+的检出限为6.25mg/L;在静态吸附实验的优化条件下(吸附时间105 min、pH值=5、吸附剂用量0.08 g),CCNC-Cur-SA水凝胶对Pb2+的吸附量达98.3 mg/g.

Abstract

In this study,based on curcumin(Cur)grafted carboxylated cellulose nanocrystal(CCNC)via EDC/NHS coupling method,CCNC-grafted curcumin(CCNC-Cur)sensor and CCNC-Cur compounded with sodium alginate(CCNC-Cur-SA)hydrogel adsorbents for the detection and removal of Pb2+were prepared.The results showed that the CCNC-Cur sensor had selective adsorption capacity for Pb2+,with Pb2+detection limit after digitizing the color depth of the sensor using Image J software of 6.25 mg/L.Under the optimized conditions of static adsorption experiment(adsorption time was 105 min,pH value was 5,adsorbent dosage was 0.08 g),the adsorption capacity towards Pb2+by CCNC-Cur-SA hydrogel reached 98.3 mg/g.

关键词

纤维素纳米晶体/CNC接枝姜黄素/Pb2+/比色传感器/吸附

Key words

cellulose nanocrystal/CCNC-grafted curcumin/Pb2+/colorimetric sensor/adsorption

引用本文复制引用

出版年

2024
中国造纸
中国造纸学会 中国制浆造纸研究院

中国造纸

北大核心
影响因子:0.525
ISSN:0254-508X
段落导航相关论文