首页|黏结剂种类对加热不燃烧型烟草薄片成形及物理性能的影响

黏结剂种类对加热不燃烧型烟草薄片成形及物理性能的影响

扫码查看
本研究结合稠浆法加热不燃烧型烟草薄片浆料的特征,探究了黏结剂种类及添加量对烟草薄片成形及物理性能的影响.通过对烟粉的理化特性进行表征,并结合Zeta电位、阳离子需求量分析,对比了不同添加量下,羧甲基纤维素钠、甲基纤维素、羟丙基瓜尔胶、黄原胶4种黏结剂制备所得稠浆的黏度稳定性及烟草薄片的物理性能.结果表明,当羟丙基瓜尔胶添加量为2%(相对于烟粉绝干质量,下同)时,稠浆黏度从23403 mPa·s增至27546 mPa·s,烟草薄片匀度可达92,抗张指数3.55 N·m/g,紧度1.12 g/cm3,透气度下降至0.30 μm/(Pa·s);当黄原胶添加量低于3%、羟丙基瓜尔胶添加量低于2%时,稠浆具有较好的稳定性,可有效改善烟草薄片的成形,提高其物理性能.
Effect of Binder Type on Forming and Physical Properties of Heat-not-burn Reconstituted Tobacco Sheets
Combined with the pulp characteristics of heat-not-burn reconstituted tobacco sheets by thick slurry method,the study investigated the effects of binder type and dosage on the forming and physical properties of reconstituted tobacco sheets.By characterizing the physico-chemical properties of tobacco powder and analyzing the Zeta potential and cation demand,the viscosity stability and physical properties of re-constituted tobacco sheets were compared under different dosage of four types of binder:sodium carboxymethyl cellulose,methyl cellulose,hydroxypropyl guar gum and xanthan gum.The results showed that the viscosity of thick slurry increased from 23403 mPa·s to 27546 mPa·s with 3%xanthan gum addition(relative to the absolute dry amount of tobacco powder),and the homogeneity of reconstituted tobacco sheets was up to 92,the tensile index was 3.55 N·m/g,the tightness was 1.12 g/cm3,and the permeability was reduced to 0.30 μm/(Pa·s).In ad-dition,when the dosage of xanthan gum was lower than 3%and the hydroxypropyl guar gum was lower than 2%,the stability of heat-not-burn reconstituted tobacco sheets was better,the forming was effectively improved,and physical properties were enhanced.

heat-not-burn reconstituted tobacco sheetsthick slurry methodviscosityformingphysical properties

胡向华、罗冲、王茹楠、田云增、陈顺辉、李锦、李斌、张俊岭、温洋兵

展开 >

天津科技大学天津市制浆造纸重点实验室,天津,300457

河南卷烟工业烟草薄片有限公司,河南许昌,461100

中国烟草总公司郑州烟草研究院,河南郑州,450001

加热不燃烧型烟草薄片 稠浆法 黏度 成形 物理性能

河南卷烟工业烟草薄片有限公司合作项目

2021410010340055

2024

中国造纸学报
中国造纸学会

中国造纸学报

CSTPCD北大核心
影响因子:0.794
ISSN:1000-6842
年,卷(期):2024.39(3)
  • 28