首页|基于沸石-水为工质对的高功率吸附热池储冷研究

基于沸石-水为工质对的高功率吸附热池储冷研究

扫码查看
为了实现高能量密度/功率密度的储热/储冷,本文采用沸石 13X-水为吸附工质对设计构建了一台基于低压吸附诱导水闪蒸的高功率吸附热池储冷样机,储冷阶段利用高温循环水驱动沸石 13X脱附,供冷阶段利用沸石 13X的低压吸附作用诱导水低温闪蒸实现冷量输出.实验结果表明:该系统在制冷前 14 min内,制冷功率可保持在 20 kW及以上,最大制冷功率达 23.45 kW,系统最大单位质量吸附剂制冷功率(SCP)可达 321.2 W/kg,空冷器进出口空气温差在制冷前 3 min到12.8 min内保持在 10℃及以上,当吸附床吸附水蒸气的平均速率为 71 g/min时,系统在开始制冷后近 36 min内能够保持 10.4 kW的稳定制冷量.
Study on High Power Sorption Battery Pool Cold Storage System Based on Zeolite and Water as Working Medium Pair
In order to achieve high energy density/power density heat storage/cold storage,zeolite 13X-water was used as the adsorption working medium to build a high-power adsorption cold storage system based on low-pressure adsorption induced water flash in this paper.In the heat storage period,zeolite 13X desorption process is forced by high temperature circulating water.In the cooling release stage,the adsorption of zeolite 13X is used to induce low-pressure flash evaporation to achieve refrigeration output.The experimental results prove that the cooling power of the system can be maintained at the level of 20 kW and above within 14 minutes after refrigeration.Meanwhile,the maximum cooling power and specific cooling power(SCP)can reach to 23.45 kW and 321.2 W/kg respectively.The air temperature difference between inlet and outlet of the air cooler is maintained above 10℃within 3 minutes to 12.8 minutes after refrigeration,with a maximum temperature difference of 10.4℃during the refrigeration process.When the average rate of water evaporation is 71 g/min,the system can maintain a steady cooling capacity of 10.4 kW for nearly 36 minutes.

Sorption battery poolCooing storageHigh powerEmergency cooling

向仕昭、晁京伟、李廷贤

展开 >

上海交通大学制冷与低温工程研究所,上海 200240

吸附热池 储冷 高功率 应急制冷

2024

制冷技术
上海市制冷学会 中国制冷学会

制冷技术

影响因子:1.053
ISSN:
年,卷(期):2024.44(1)