首页|S型翼缝与尾缘襟翼联合控制风力机翼型气动性能的研究

S型翼缝与尾缘襟翼联合控制风力机翼型气动性能的研究

Study on Aerodynamic Performance of Wind Turbine Airfoil With Combined S-Slot and Trailing Edge Flap Control

扫码查看
降低叶片气动载荷对于延长风力机叶片寿命极为重要,尾缘襟翼是降低叶片气动载荷的一种有效手段,然而其在大攻角下对翼型的气动特性控制效果减弱.通过在50%叶片弦长处添加S型翼缝,采用数值模拟方法研究S型翼缝与尾缘襟翼联合调节风力机叶片气动特性的作用.利用剪切应力输运(shear stress transport,SST)湍流模型,计算模拟了S809翼型在雷诺数106下,S型翼缝与尾缘襟翼联合控制对翼型气动特性的影响,并分析了S型翼缝与尾缘襟翼的协同控制机理.结果表明,尾缘襟翼的偏转可显著改变翼缝槽内的气体流量,并有效调节叶片中部的压差,这种联合控制策略可在大攻角下大幅改善翼型的失速现象,从而显著增强尾缘襟翼对升力系数的调控能力.
Reducing the blade aerodynamic loads is extremely important to extend the life of wind turbine blades.Trailing edge flaps are effective means to reduce blade aerodynamic loads,however,its regulation ability weakens greatly at large angles of wind attack.The combined regulation ability on the aerodynamic characteristics of wind turbine blades by S-slot and trailing edge flaps and by adding S-slot at 50%of the chord length of turbine blade was investigated.The shear stress transport(SST)turbulence model was used to study the effect of combined control of S-slot and trailing edge flaps on the aerodynamic characteristics of S809 airfoil at Reynolds number of 106.The synergistic mechanism between the S-slot and trailing edge flaps was further analyzed.The results show that the deflection of trailing edge flaps can significantly change the gas flow rate in the slot,and effectively adjust the pressure difference in the middle of the blade.This combined control strategy can significantly improve the stall phenomenon of airfoil at large angles of wind attack,thereby significantly enhancing the ability of trailing edge flaps to control the lift coefficient.

wind energywind turbineairfoilairfoil slotflapaerodynamic performance

秦志鹏、魏高升、崔柳、杜小泽

展开 >

电站能量传递转化与系统教育部重点实验室(华北电力大学),北京市 昌平区 102206

风能 风力机 翼型 翼缝 襟翼 气动性能

国家自然科学基金项目

51776066

2024

发电技术
华电电力科学研究院

发电技术

CSTPCD
影响因子:0.388
ISSN:2096-4528
年,卷(期):2024.45(1)
  • 13