生铁遗传性对球墨铸铁性能的影响
Influence of Pig Iron Inheritance on the Properties of Nodular Cast Iron
李晓艳 1赵培根 1马宏军 1杨麟 2俞健良3
作者信息
- 1. 宁波日月重工股份有限公司,浙江宁波 315113
- 2. 宁波明凌科技有限公司,浙江宁波 315700
- 3. 宁波日星铸业有限公司,浙江宁波 315700
- 折叠
摘要
研究了同样的炉料配比情况下,生铁种类对球磨铸铁性能的影响.试验浇注温度为1 340℃～1 350 ℃,浇注边长250 mm的立方块,观察其显微组织,并进行性能测试.结果表明:相同生产条件下,不同生铁在占比相同的情况下,其自身组织形态对球墨铸铁的石墨大小、球化率、组织及性能有明显的差异,其中石墨球数量与低温冲击性能的影响程度最大,A、B、C、D生铁的边缘与心部每平方毫米石墨跨度分别在10～25与20～35两区间.
Abstract
The effects of pig iron types on the properties of ductile iron with the same charge ratio were studied.The cube with side length of 250 mm was poured at 1 340 ℃～1 350 ℃,and its microstructure was observed and its performance was tested.The results showed that under the same production conditions,the self-organization morphology of different pig irons had significant differences in the graphite size,spheroidization rate,structure and properties of nodular cast iron under the same proportion,among which the number of graphite balls had the greatest impact on the low-temperature impact performance.The edges and hearts of pig iron A,B,C,and D have graphite spans of 10～25 and 20～35 per square millimeter,respectively.
关键词
球墨铸铁/生铁种类/显微组织/组织形态/石墨大小/球化率Key words
ductile iron/pig iron type/microstructure/tissue morphology/graphite size/spheroidization rate引用本文复制引用
出版年
2024
NETL
NSTL
万方数据