首页|Spark plasma sintering and microstructural characterization of additive- free polycrystalline β-SiC
Spark plasma sintering and microstructural characterization of additive- free polycrystalline β-SiC
扫码查看
点击上方二维码区域，可以放大扫码查看
原文链接
NETL
NSTL
Trans Tech Publications Ltd
Additive-free β-SiC powders were sintered by means of Spark Plasma Sintering System. Experiments were performed in the temperature range from 1650℃ to 2200℃, 3 to 10 min holding time and pressure from 50 until 150 MPa. In order to favour sinterization, the starting powder was mechanically activated: defect concentration was increased by centrifugal ball milling. Applied temperature, holding time and/or pressure were varied to analyze their effect on the densification and grain growth kinetics. The full sinterization of the material was obtained for temperatures as high as 1900℃ and over. The relative density of the obtained material was high, up to 97.0 ± 0.6 % the theoretical density for 2200℃ sintering temperature. An intense grain growth took place while sintering. The final microstructure exhibited a grain size distribution range from 1.0 to 2.5 μm, depending on the sintering conditions. Such grain growth strongly depends on the sintering time, not so much on the sintering temperature.
spark plasma sintering system (SPS)P-SiCsinteringcharacterizationceramic
A. Lara、R. Poyato、A. Munoz、A. L. Ortiz、A. Dominguez-Rodriguez
展开 >
Departamento de Fisica de la Materia Condensada, Facultad de Fisica, Universidad de Sevilla, Apartado 1065, 41012 Sevilla, Spain
Departamento de Fisica, Facultad de Ciencias, Universidad de Extremadura, 06071 Badajoz, Spain
NETL
NSTL
Trans Tech Publications Ltd
