首页|Analysis of metal flow of aluminum through long choked die channels
Analysis of metal flow of aluminum through long choked die channels
扫码查看
点击上方二维码区域，可以放大扫码查看
原文链接
NETL
NSTL
The mechanics of metal flow through long choked die channels have been investigated in unlubricated hot aluminum extrusion. Experiments were performed in a laboratory press at an earlier occasion by letting a grid pattern introduced into the billet flow down into the choked die channel to appear adjacent to the channel wall. The grid pattern was then revealed to characterize the metal flow in the channel.A 2D-model of the extrusion process was made. The model was applied to study the conditions in the extrusion experiments and in this model good similarity was obtained with the experiment. New knowledge regarding the metal flow through a choked die channel have been obtained this way, such as; contact conditions, presence of sticking and sliding zones, friction conditions in the sliding contact zone and the velocity profile over the cross-section of the channel.
metal flowdie channelcontact conditionsshear layerplug flow
Henry Valberg
展开 >
Norwegian University of Science and Technology, Department of Engineering Design and Materials, Richard Birkelands vei 2b, 7491, Trondheim, Norway
NETL
NSTL
