首页|Milling Force Modeling for Ti-5Al-5Mo-5V-1Cr-1Fe Alloy

Milling Force Modeling for Ti-5Al-5Mo-5V-1Cr-1Fe Alloy

扫码查看
原文链接
  • NETL
  • NSTL
  • Trans Tech Publications Ltd
With the development of aerospace, biomedical and chemical industries, titanium alloy Ti-5Al-5Mo-5V-1Cr-1Fe (TC18) is becoming widespread used. TC18 has even better mechanical property than Ti-6A1-4V (TC4). For better cutting TC18, simulation model was set up. PVD and CVD coated carbide inserts were used to machine titanium alloy TC18. The cutting forces were measured. Milling model was set up for the extraction of the cutting force coefficients and chip flow angle. Results were compared. All the coefficients of CVD coated carbide insert were found to be larger than those of PVD coated carbide insert. The model was proved to be reasonable after validation.

millingforce modelingTi-5Al-5Mo-5V-1Cr-1Fe (TC18)cutting pressure coefficients

Guoliang Zhang、Weiwei Ming、Ming Chen、Bing Han、Bin Rong

展开 >

School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, China, 200240

Shanghai Aircraft Manufacturing Factory, Commercial Aircraft Corporation of China Ltd.

2010

10.4028/www.scientific.net/KEM.431-432.539

Key engineering materials

Key engineering materials

ISSN：1013-9826
年,卷(期)：2010.431/432
  • 6