首页|Experimental Study on the Performance of WC-Co Inserts in Turning 4Cr13 Die Steel

Experimental Study on the Performance of WC-Co Inserts in Turning 4Cr13 Die Steel

扫码查看
原文链接
  • NETL
  • NSTL
  • Trans Tech Publications Ltd
These years, the mold has become a very important forming tool in modern industry. And the die steel is the most important technical and material base in mold industry. To obtain the optimized cutting parameters, this paper introduced the cutting performance of WC-Co carbide cutting tools (P10) from cutting force, the surface roughness, chip deformation and the chip-breaking performance in turning 4Cr13 die steel. And the cutting parameters were optimized by homogeneous design method and multiple linear regression analysis method in this paper. The regression models on cutting forces and surface roughness with the cutting parameters were studied and taken the tests of significance. The result showed that it was more suitable for finish turning 4Cr13 die steel using WC-Co carbide tools at v_c =183.3m/min, f=0.2mm/r, a_p=0.75mm or v_c =200m/min, f=0.1mm/r, a_p=1mm.

turningcutting performance4Cr13chipsregression analysis

Qiulin Niu、Qinglong An、Ming Chen、Gang Liu、Yunshan Zhang

展开 >

School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, P.R. China

Shanghai Tool works Co, LTD, Shanghai, P.R. China

Changchun FAW Tool & Equipment Co., LTD, Changchun, P.R. China

2010

10.4028/www.scientific.net/KEM.443.256

Key engineering materials

Key engineering materials

ISSN：1013-9826
年,卷(期)：2010.443
  • 1
  • 8