首页|Nitrogen and Bias Effect on Homoepitaxial Diamond Growth by Hot-Filament Chemical Vapor Deposition

Nitrogen and Bias Effect on Homoepitaxial Diamond Growth by Hot-Filament Chemical Vapor Deposition

扫码查看
原文链接
  • NETL
  • NSTL
  • Trans Tech Publications Ltd
The development of homoepitaxial films for advanced device applications has been studied, but high growth rate and diamond film quality have not yet been explored. In the current study, high quality homoepitaxial diamond films were grown on type Ib (100) HPHT synthetic diamond substrate by hot-filament chemical vapor deposition. The reactant gases were mixed by CH_4 and H_2 with small amounts of N_2 (500 to 3000 ppm). Besides, a bias system was used to assist diamond film deposition. The pyramidal crystals on diamond surface can be suppressed and high quality diamond film of FWHM (Full Width at Half Maximum) = 10.76 cm~(-1) with high growth rate of 8.78 ± 0.2 μm/ hr was obtained at the condition of adding 1000 ppm nitrogen. At the bias voltage of-150 V, the pyramidal crystals can also be suppressed and high quality diamond film of FWHM = 10.19 cm~(-1) was obtained. With nitrogen addition above 2000 ppm, diamond film was partly doped and some sp~2 structures appeared. These homoepitaxial diamond films were characterized by optical microscopy and micro-Raman spectroscopy.

homoepitaxial diamondhot filament chemical vapor depositionbiasnitrogen effect

Hung-Yin Tsai、Chih-Cheng Chang、Chin-Wei Wu

展开 >

Department of Power Mechanical Engineering, National Tsing Hua University, Hsinchu, Taiwan

Department of Mechanical & Mechatronic Engineering, National Taiwan Ocean University, Taiwan

2010

10.4028/www.scientific.net/KEM.443.510

Key engineering materials

Key engineering materials

ISSN：1013-9826
年,卷(期)：2010.443
  • 1
  • 10