首页|Optimal Parameter Design of Solder Residue in Flip Chip Process by Using Taguchi Method
Optimal Parameter Design of Solder Residue in Flip Chip Process by Using Taguchi Method
扫码查看
点击上方二维码区域，可以放大扫码查看
原文链接
NETL
NSTL
Trans Tech Publications Ltd
Because the solder residue was found in the manufacturing process which greatly affected the product quality, the purpose of this paper was to make the product quality improved and to find an optimal solution for process parameters in the flip chip process. The experimental testing was based on SMT manufacturing process. The amount and size of solder left on passive component in the process of manufacturing were considered as the quality traits. Since too many solders left on the passive component side during flux cleaning process, it was possible that the balling would be flowed into the chip, which caused the bump short in the chip and affected the quality of the product. In this paper, orthogonal array by using Taguchi method is adopted as the effective experimental method with the least experimental runs. Also, based on the quality evaluation of signal-to-noise ratio, the ANOVA is used to evaluate the effects of quality target according to the experimental results. The results reveal that the optimization in the process is confirmed. Therefore, this study can effectively improve the solder residue in semiconductor manufacturing process.
solder beadsolder residuetaguchi method
Jian-Long Kuo、Kai-Lun Chao、Chun-Cheng Kuo
展开 >
Department of the Mechanical and Automation Engineering,National Kaohsiung First University of Science and Technology, Nantze, Kaohsiung 811, Taiwan
NETL
NSTL
Trans Tech Publications Ltd
