首页|Fracture indentation on AISI 1018 borided steels
Fracture indentation on AISI 1018 borided steels
扫码查看
点击上方二维码区域，可以放大扫码查看
原文链接
NETL
NSTL
Trans Tech Publications Ltd
Fracture indentation was applied to estimate the fracture toughness of AISI 1018 borided steels. The Fe_2B hard layers were formed using the powder-pack boriding process for two temperatures with 4 and 8 h of exposure times. The fracture toughness of the iron boride layer of the AISI 1018 borided steels was estimated using a Vickers microindentation induced-fracture testing at distances of 15 and 30 μm from the surface, applying four loads (0.49, 0.98, 1.96 and 2.9 N). The microcracks generated at the corners of the Vickers microindentation were considered as experimental parameters, which are introduced in a Palmqvist crack model to determine their corresponding fracture toughness K_C. As a result, the experimental parameters, such as exposure time and boriding temperature are compared with the resulting fracture toughness of the borided phase.
I. Campos-Silva、M. Ortiz-Dominguez、E. Hernandez-Sanchez、D. Bravo-Barcenas、O. Bravo-Barcenas、M. A. Donu-Ruiz、J. Martinez-Trinidad、J. A. Jimenez-Bernal、Y. Dominguez-Galicia
展开 >
Instituto Politecnico Nacional, Grupo Ingenieria de Superficies, SEPI-ESIME, U. P. Adolfo Lopez Mateos, Zacatenco, Mexico D.F., 07738, Mexico
Instituto Politecnico Nacional, UPIBI, Av. Acueducto s/n, Barrio La Laguna, Ticoman, Mexico D.F., 07740, Mexico
NETL
NSTL
Trans Tech Publications Ltd
