首页|Fabrication and Molding Testing of the Blazed Gratings for Microoptics Applications
Fabrication and Molding Testing of the Blazed Gratings for Microoptics Applications
扫码查看
点击上方二维码区域，可以放大扫码查看
原文链接
NETL
NSTL
Trans Tech Publications Ltd
This paper presents the experimental investigation of the optimal hot embossing replication to prevent the nanoscale thermal deformation of microstructures replicated from the electroless Ni mold fabricated by the diamond tool-interfered scribing process. The fabricated microstructures have the blazed profile with a period of 2.0 μm and a depth of 0.2 μm, and a thermoplastic material PMMA as the replica was used. The hot embossing molding was carried out under the several experimental conditions. In terms of a quality of surface smoothness, profile, sharp blaze edge, surface roughness, peak to valley R_y and optical performance of the replica, the PMMA microstructures replicated under the optimal conditions, were ideally identical with those in the mold in dimension, and it was found that the demolding temperature is the most important factor for replication. From optical testing, diffraction efficiency of the replica was measured, 87.6%, similar to that of the calculated value 89.6%, and the replica molded in other conditions showed the noticeable efficiency drop due to molding error.
NETL
NSTL
Trans Tech Publications Ltd
