Applied thermal engineering2022,Vol.21031.DOI:10.1016/j.applthermaleng.2022.118342

Review on aqueous graphene nanoplatelet Nanofluids: Preparation, Stability, thermophysical Properties, and applications in heat exchangers and solar thermal collectors

Leong, Kin Yuen Kazi, Salim Newaz Chew, Bee Teng Huq, Tahsinul Ong, Hwai Chyuan
Applied thermal engineering2022,Vol.21031.DOI:10.1016/j.applthermaleng.2022.118342

Review on aqueous graphene nanoplatelet Nanofluids: Preparation, Stability, thermophysical Properties, and applications in heat exchangers and solar thermal collectors

Leong, Kin Yuen 1Kazi, Salim Newaz 2Chew, Bee Teng 2Huq, Tahsinul 2Ong, Hwai Chyuan3
扫码查看

作者信息

  • 1. Univ Pertahanan Nasl Malaysia
  • 2. Univ Malaya
  • 3. Natl Yunlin Univ Sci & Technol
  • 折叠

Abstract

Nanofluids of graphene nanoplatelets (GNP) have superior thermal performance characteristics and good sta-bility, are relatively affordable, and can easily be prepared by the two-step method. This review performs an in-depth analysis of the preparation, stability, and thermophysical properties of GNP nanofluids, and their appli-cations in heat exchangers, solar thermal collectors, and heat pipes. This study analyses in detail the performance improvements achieved with pristine, covalent functionalised, and non-covalent functionalised GNP nanofluids compared to water. Covalent functionalisation was found to be superior to non-covalent functionalisation in terms of stability and heat transfer coefficients. Functionalisation by electrophilic addition and free-radical grafting were found to be more environmentally friendly compared to acid treatment. In terms of convective heat transfer coefficient, pristine GNP outperformed functionalised GNP, but both types showed large im-provements compared to water. It was found that stability and heat transfer performance improved as particle size was decreased, while thermal conduction and convection coefficients increased with nanofluid concentra-tion and temperature. Thermal conductivity improvements of over 30% were found for both pristine and covalently functionalised GNP nanofluids at 0.1 wt% concentration. A maximum convection heat transfer co-efficient increase of 200% was achieved using 0.1 wt% pristine GNP nanofluid. By comparison, a maximum improvement of 119% was achieved using covalently functionalised GNP. The convective heat transfer enhancement seemed to increase with decreasing tube diameter. In flat plate solar collector applications, effi-ciency improvements over 20% were obtained for covalently functionalised GNP nanofluids at 0.1 wt%, while an efficiency improvement of over 65% was obtained using pristine GNP in an evacuated tube solar collector. Applications in cooling, heat pipes, and direct absorption solar collectors were also reviewed. From this study, it could be inferred that GNP nanofluids are a viable alternative working fluid. Further research is needed to optimise their performance.

Key words

Graphene nanoplatelets/Nanofluid/Heat transfer/Heat exchanger/Solar thermal collector/PHYSICAL PROPERTIES/TRANSFER PERFORMANCE/TRANSFER ENHANCEMENT/ENTROPY GENERATION/HYBRID NANOFLUIDS/ETHYLENE-GLYCOL/PRESSURE-DROP/CONDUCTIVITY/FUNCTIONALIZATION/ENERGY

引用本文复制引用

出版年

2022
Applied thermal engineering

Applied thermal engineering

EISCI
ISSN:1359-4311
被引量20
参考文献量115
段落导航相关论文