首页|Analysis on tenon tooth cracks of a second stage high-pressure turbine blade
Analysis on tenon tooth cracks of a second stage high-pressure turbine blade
扫码查看
点击上方二维码区域，可以放大扫码查看
原文链接
NSTL
Elsevier
Several cracks were observed on the fifth tenon tooth root of some second stage high pressure turbine blades of an aero-engine after ground test run. Surface and sectional morphologies of cracks, recrystallization and microstructure of the near-surface were utilized to explore surface integrity of the tenon tooth root. Besides, the finite element analysis was carried out to estimate the static strength and temperature field of the turbine blade. The results showed that most of the cracks were along the near-surface carbides, where undergone grinding burn with the formation of the white layer and fine secondary gamma ' phases, and then cracks fatigue propagated during operating. Some cracks above the microporosities were ascribed to the local stress concentration when contacting with the grinding wheel during the creep feed grinding. The recrystallization occurred on the tenon teeth surface during annealing at 1000 degrees C for four hours after grinding, and related cracks were not observed in the recrystallized fine grains layer during operating.
NSTL
Elsevier
