首页|CFD simulation of turbulent fluid flow and dust dispersion in the 1 m(3) explosion vessel equipped with the rebound nozzle
CFD simulation of turbulent fluid flow and dust dispersion in the 1 m(3) explosion vessel equipped with the rebound nozzle
扫码查看
点击上方二维码区域，可以放大扫码查看
原文链接
NSTL
Elsevier
Against dust explosions, all the flammability and explosibility parameters must be evaluated following standard procedures using the 20 L and/or the 1 m(3) vessel. Previous results comparing the dust dispersion in the 20 L sphere equipped with rebound or perforated annular nozzle showed that the initial turbulence level, the dust concentration, and the feeding are affected by the type of nozzle used. In this work, a similar investigation was performed on the 1 m(3) vessel, simulating the fluid flow evolution which is obtained with the rebound nozzle. Results showed that the 1 m3 vessel equipped with rebound nozzle presents a less uniform degree of turbulence and a higher amount of dust fed, compared to the case of perforated annular nozzle. However, the greatest effect on the initial level of turbulence and turbulent combustion regime is determined by the size of the vessel and not by the type of nozzle used.
NSTL
Elsevier
