Abstract
Development of surfactant formulations for high temperature (100 °C), high salinity (>50,000 ppm) and especially high hardness (>2000 ppm) reservoirs is challenging. Alkah-surfactant-polymer processes have been developed in the past, but requires soft injection brine. The objective of this work is to develop a surfactant-polymer (SP) process for a high temperature, high salinity (HTHS) reservoir that can be injected with available hard brines (such as sea water) to achieve ultra-low IFT, low residual oil saturation, and low surfactant retention in carbonate rocks. Phase behavior experiments were performed to identify a combination of anionic and zwitterionic surfactants. Four tertiary chemical corefloods were conducted in Indiana Limestone cores to test oil recovery and surfactant retention. A copolymer containing acrylamido-tertiary-butyl sulfonate, SAV10xv was identified to be stable at this HTHS condition. Sodium polyacrylate (NaPA) was identified as a sacrificial chemical to reduce surfactant adsorption. The chemical floods were successful in reducing the residual oil saturation to 8-11%. A preflush of NaPA reduced the surfactant retention from 0.133 mg/g to 0.017-0.038 mg/g of rock. Including the NaPA in the chemical slug was not as effective. The use of this surfactant formulation with a preflush of sodium polyacrylate can enhance the oil recovery in high temperature, high salinity carbonate reservoirs with very low surfactant retention.
NSTL