首页|(163077)Fabrication and properties of symmetrical W/Si_3N_4/W functionally graded materials by spark plasma sintering
(163077)Fabrication and properties of symmetrical W/Si_3N_4/W functionally graded materials by spark plasma sintering
扫码查看
点击上方二维码区域，可以放大扫码查看
原文链接
NSTL
Elsevier
Si_3N-4 ceramics have shown promising application prospects as the sealing materials for liquid metal batteries (LMBs). However, the joining of Si_3N-4 to the metal shell of LMBs is rather difficult because of the non-wetting property and mismatch of their thermal expansion coefficients (CTEs). Herein, to solve the above issue, W/Si_3N-4 functionally graded materials (FGMs) were designed and fabricated via the spark plasma sintering (SPS) process. The effects of layer numbers and layer components on the phase composition, structure, and thermal stress of the FGMs were systematically investigated using both experimental and simulation methods. W/Si_3N-4 FGMs, with optimal layer numbers, were then utilized for fabricating symmetrical W/Si_3N-4/W FGMs. The thermal stress of the products can be effectively reduced by adjusting the MgO content of the central Si_3N-4 layer. As a result, the optimal product displayed good interface bonding between two adjacent layers and also exhibited high flexural strength (943.9 MPa) and electrical resistivity (2.0 × 10~(12) Ω cm). This route for the fabrication of symmetrical W/Si_3N-4/W FGMs exhibits the advantage of high efficiency, and the products with excellent properties can be used as sealing materials for LMBs.
Si_3N-4WFunctionally graded materialsFinite element analysisFlexural strength
Zhilei Wei、Siyu Liu、Dangui Liu
展开 >
State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an 710049, China
NSTL
Elsevier
