首页|High-temperature oxidation and quenching of chromium-coated zirconium alloy ATF cladding tubes with and w/o pre-damage
High-temperature oxidation and quenching of chromium-coated zirconium alloy ATF cladding tubes with and w/o pre-damage
扫码查看
点击上方二维码区域，可以放大扫码查看
原文链接
NSTL
Elsevier
Chromium-coated zirconium alloys are one of the promising candidates for accident-tolerant fuel cladding (ATF) tubes for light water reactors (LWRs). In this study, the high temperature oxidation and degradation of two types of Cr coatings (cold spray and physical vapor deposition) with and without pre-damage by scratches were investigated on prototype rod segment samples filled with ZrO2 pellets and tightly sealed with welded end caps. Isothermal tests at 1100 and 1200 degrees C were terminated by quenching with water; transient tests were performed up to 1500-1600 degrees C until complete coating failure. The positive effect of both types of Cr coatings was observed in all tests. Pre-damaged specimens showed only locally increased oxidation of the scratched zone, but no negative effects on the adjacent Cr coating. The behavior of the two types of coatings is compared and the degradation mechanisms are discussed based on hydrogen release data, extensive metallographic post-test examinations, and the current state of global research. (C) 2021 Elsevier B.V. All rights reserved.
WATER-VAPORZIRCALOY-4KINETICS
Steinbrueck, M.、Stegmaier, U.、Grosse, M.、Czerniak, L.、Lahoda, E.、Daum, R.、Yueh, K.
NSTL
Elsevier
