首页|Effects of vertical anisotropy on optimization of multilateral well geometry
Effects of vertical anisotropy on optimization of multilateral well geometry
扫码查看
点击上方二维码区域，可以放大扫码查看
原文链接
NSTL
Multilateral wells have been increasingly used in recent years by different industries such as the oil-and gas industry (incl. coal-bed methane (CBM)) and geothermal energy production. The common purpose of these wells in the oil industry and partially in the geothermal industry is to achieve a higher production rate per well without increasing the hydraulic gradient signifcantly. In geothermal systems the ultimate objective is to improve heat extraction performance by enhancing productivity but also by increasing the heat transfer area. Optimal design of multilateral wells has been the focus of numerous publications in CBM and unconventional oil-and gas production, but as a result of cross-fertilization and technology-transfer among different sectors in the energy industry in the last few years, the focus of research on multilateral wells has turned to enhanced geothermal systems (EGS). Recently, several papers have been published on the use of multilateral wells in deep geothermal reservoirs. Coaxial closed-loop geothermal systems with multilateral wells utilize only the increased heat transfer area due to the laterals while EGS’s with multilateral injection and production wells also beneft from the hydrodynamic advantages of such well confgurations. However, substantial emphasis is-understandably-placed on the effect of artifcial and natural fracture networks of EGS reservoirs and less focus is devoted to the impact of vertical permeability anisotropy which can seriously infuence the fow pattern of a given confguration. Similarly, in CBM-related studies, the effect of horizontal permeability anisotropy along the face cleats to the butt cleats on multilateral well-design was investigated and vertical permeability anisotropy was not considered. In the current work we present a generalized approach for evaluating the effects of vertical permeability anisotropy on multilateral well geometry by numerical hydrodynamic modelling in an idealized, homogeneous hydrogeological setting. Current paper proposes an alternative modelling approach for representing the non-horizontal branches of multilateral wells by introducing a thin layer for the laterals with the same inclination as the well branches. This approach is then is used to investigate the effect of anisotropy on the fow pattern and near-wellbore drawdown and hydraulic gradient in the case of different branch deviations. Results suggest that the benefts of highly deviated or horizontal laterals emerge when vertical anisotropy is high. Evaluation of branch deviation vs. anisotropy indicates that above approx. 60? there is no signifcant beneft in increasing deviation which implies that very highly deviated or horizontal laterals might not necessarily pay off the associated technical challenges and extra costs.
Multilateral wellsPermeability anisotropyUnstructured gridsGeothermal energyOil-and gas production
Marcell Lux、Janos Szanyi
展开 >
University of Szeged, H-6722, Szeged, Egyetem u. 2-6, Hungary
NSTL
