Abstract
As-explosive welded clad plates usually show poor ductility due to heavily deformed microstructures developed after explosive welding (EXW). In this study, the feasibility of improving mechanical properties of an EXWed Mg-6Al-1Zn-lCa (AZX611)/AI-0.6Mg-0.6Si-0.1Fe (A6005C) (all in wt%) clad plate has been explored by subsequent hot-rolling. Increasing the thickness reduction per pass from 10% to 28% or decreasing the rolling temperature from 430 °C to 250 °C is shown to enhance tensile properties. The joint sheet rolled at 250 °C with a thickness reduction per pass of 28% shows a large fracture elongation of 15%, which is significantly higher than that of the as-EXWed clad plate, 1.2%. Microstructure characterization by means of scanning electron microscope, electron backscatter diffraction and transmission electron microscope reveals that the substantial improvement in ductility is intimately related to a significant reduction of the accumulated strain in AZX611 and A6005C alloy sheets and an elimination of the interface delamination formed during EXW. A certain degree of anisotropic mechanical properties is observed in all sheets regardless of rolling conditions, which can be ascribed to the mechanical anisotropy originated from the AZX611 and A6005C alloy sheets.
NSTL
Elsevier