首页|Effect of particle size on grain growth of Nd-Fe-B powders produced by gas atomization

Effect of particle size on grain growth of Nd-Fe-B powders produced by gas atomization

扫码查看
? 2022 The AuthorsGas atomized Nd-Fe-B powders of several compositions were separated in different size fractions by sieving. These fractions were annealed between 1100 °C and 1150 °C for 24 and 96 h. The oxygen content of the powders was measured before and after annealing for the different size fractions. The oxygen concentration of the powders depends strongly on the particle size and increases significantly during annealing, particularly in the case of small particle sizes. The effect of particle size on the microstructural changes was analyzed in detail, particularly on grain growth, using high resolution scanning electron microscopy and transmission electron microscopy. Electron back scattering diffraction was used to measure grain size. When the particle size rises, the degree of sintering decreases and the higher solid/vapor surface area reduces the mobility of grain boundaries. Oxidation also reduces grain growth rate and its effect is more evident for particles sizes below 45–63 μm and high Nd concentrations. Nb addition leads to the formation of intra- and intergranular precipitates. The size of these Nb-Fe-containing precipitates increases with the particle size for equivalent annealing conditions. At 1150 °C, Nb loses its effect as an inhibitor of grain growth in the particle size fractions larger than 45–63 μm.

EBSDGas atomizationGrain growthNd-Fe-B alloyParticle sizePrecipitation

Sarriegui G.、Martin J.M.、Burgos N.、Ipatov M.、Zhukov A.P.、Gonzalez J.

展开 >

CEIT-Basque Research and Technology Alliance (BRTA)

SGIker (Magnetic Measurements) University of the Basque Country

IKERBASQUE Basque Foundation for Science

Department of Advanced Polymers and Materials: Physics Chemistry and Technology Faculty of Chemistry University of the Basque Country UPV/EHU

展开 >

2022

Materials Characterization

Materials Characterization

EISCI
ISSN:1044-5803
年,卷(期):2022.187
  • 4
  • 52