首页|Performance analysis of aqueous LiCl and CaCl2 based falling film dehumidifier with surface modification
Performance analysis of aqueous LiCl and CaCl2 based falling film dehumidifier with surface modification
扫码查看
点击上方二维码区域，可以放大扫码查看
原文链接
NSTL
Elsevier
In summer air-conditioning, conventional vapor compression systems cool the process air to its dew point temperature for dehumidification and further heat it to required supply temperature. This involves extra cooling and subsequent heating. Liquid desiccant systems avert this issue by separately handling latent and sensible loads, while running primarily on low grade thermal energy. Falling film type liquid desiccant dehumidifiers are advantageous over other types, mainly, as they reduce desiccant carryover into supply air stream. The current work aims towards the analysis and the performance improvement of a falling film type dehumidifier with the help of wavy profile of the working surface. Detailed comparison of the two commonly used desiccants, i.e., LiCl and CaCl2 are carried out to analyse the performance of the dehumidifier. The present work also includes the characterisation of the wave profile and the analysis in terms of various important parameters, such as, the dehumidification effectiveness, the moisture removal rate and the change in specific humidity, missing in earlier studies. In order to study the performance, a simplified 2-D transient finite volume model is taken into consideration to simulate a multiphase, multi-component conjugate heat and mass transfer system using ANSYS Fluent 19.2. The volume of fluid method is used to trace out the liquid-gas interface. With back-end modification of the solver, the thermophysical properties of the liquid film are evaluated using empirical relationships, as a function of temperature and concentration. The penetration model of mass transfer provides the local mass transfer coefficients. The moisture removing the potential of the aqueous solutions of LiCl and CaCl2 are eval-uated at quasi steady-state conditions. The numerical solver is validated with the already published experimental results with a maximum deviation of 10.31%. A sinusoidal wavy profile of the wall introduced in the system enhances the turbulence intensity by 3.8% and the dehumidification performance by 33.18% and 18% for LiCl and CaCl2, respectively. It is due to the enhanced liquid-gas interface area. The mean film thickness is found to improve by 15.25% and 13.38% for LiCl and CaCl2, respectively. The effect of process parameters on the per-formance of the dehumidifier is also studied. It has been observed that the dehumidification effectiveness de-creases from 86.14% to 31.1% with increase in inlet air velocity from 0.2 m/s to 2.0 m/s. It has also been found that a lower concentration of the desiccant solution and lower velocity of air yield higher dehumidification effectiveness. However, the moisture removal rate of the system will be compromised. Compared to the previ-ously studied cases, the current configuration of the sinusoidal profile with amplitude to wavelength ratio of 1:15, yields superior dehumidification performance.
Liquid desiccantDehumidificationFalling filmHeat and mass transferPenetration theoryCFD simulation
Das, Aabir、Das, Rajat Subhra、Das, Koushik
展开 >
NIT Meghalaya, Dept Mech Engn, Shillong 793003, Meghalaya, India
NSTL
Elsevier
