首页|On the origin of micro-cracking in zinc-coated press hardened steels

On the origin of micro-cracking in zinc-coated press hardened steels

扫码查看
原文链接
  • NSTL
© 2022 Elsevier B.V.Zn-coated press hardened steels (PHS) are in high demand for automotive mass reduction and enhanced passenger safety applications while the Zn coating supplies robust cathodic corrosion protection. However, the mechanism of micro-crack formation during direct hot-press forming (DHPF) has not been adequately described. Thus, the objective of this work was to determine the mechanism for micro-crack formation in Zn-coated DHPF PHS that addressed the relationship between micro-cracking and the coating microstructure created during substrate austenitization. Zn-coated 22MnB5 steel sheets were annealed at 900 °C for annealing times ranging from 30 to 780 s and DHPF at 75 °C s−1 to obtain a fully martensitic substrate microstructure. The inward diffusion between the Zn coating and the substrate during annealing resulted in a dual phase coating microstructure initially comprising Γ-Fe3Zn10 + α-Fe(Zn), transitioning to a single phase α-Fe(Zn) coating after annealing for 240–420 s. Coincident coating α-Fe(Zn) and substrate Zn-enriched austenite (γ-Fe(Zn)) grain boundaries became Zn-enriched, forming a thin layer of α-Fe(Zn) along the γ-Fe(Zn) grain boundaries. It is proposed that coincident coating α-Fe(Zn) and substrate prior austenite grain boundaries (PAGBs) were weakened by this grain boundary α-Fe(Zn) layer. Upon the application of tensile stress, intergranular fracture occurred along the coincident coating α-Fe(Zn) and Zn-enriched PAGBs in the Zn-enriched martensite (M(Zn)) layer. It was further determined that crack propagation ceased and the crack tip was blunted when Zn-enrichment along the PAGBs in the M(Zn) layer was exhausted.

Direct press-hardeningGalvanized coatingsMicro-crackingPress-hardened steels

McDermid J.R.、Bassim N.D.、Maleki K.、Pallisco D.M.

展开 >

Department of Materials Science and Engineering McMaster University

2022

10.1016/j.surfcoat.2022.128360

Surface & Coatings Technology

Surface & Coatings Technology

ISTP
ISSN：0257-8972
年,卷(期)：2022.437
  • 38