查看更多>>摘要：Magnesium materials have attracted the attention of many researchers,and the related research is expanding.This article summarizes the advance in the research and development of magnesium materials globally in 2023 from bibliometric and scientific perspectives.More than 4680 articles on Mg and its alloys were published and indexed in the Web of Science(WoS)Core Collection database last year.The bibliometric analyses show that the traditional structural Mg alloys,functional Mg materials,and corrosion and protection of Mg alloys are still the main research focus.Therefore,this review paper mainly focuses on the research progress of Mg cast alloys,Mg wrought alloys,bio-magnesium alloys,Mg-based energy storage materials,corrosion and protection of Mg alloys in 2023.In addition,future research directions are proposed based on the challenges and obstacles identified throughout this review.
查看更多>>摘要：Magnesium-ion batteries(MIBs)are promising candidates for lithium-ion batteries because of their abundance,non-toxicity,and favorable electrochemical properties.This review explores the reaction mechanisms and electrochemical characteristics of Mg-alloy anode materials.While Mg metal anodes provide high volumetric capacity and dendrite-free electrodeposition,their practical application is hindered by challenges such as sluggish Mg2+ion diffusion and electrolyte compatibility.Alloy-type anodes that incorporate groups ⅩⅢ,ⅩⅣ,and ⅩⅤ elements have the potential to overcome these limitations.We review various Mg alloys,emphasizing their alloying/dealloying reaction mechanisms,their theoretical capacities,and the practical aspects of MIBs.Furthermore,we discuss the influence of the electrolyte composition on the reversibility and efficiency of these alloy anodes.Emphasis is placed on overcoming current limitations through innovative materials and structural engineering.This review concludes with perspectives on future research directions aimed at enhancing the performance and commercial viability of Mg alloy anodes and contributing to the development of high-capacity,safe,and cost-effective energy storage systems.
查看更多>>摘要：In response to global carbon neutrality targets,there is an urgent need for large-scale,clean hydrogen production technologies to supplant fossil fuels and underpin the establishment of a'hydrogen economy'.The prospect of large-scale on-site green hydrolysis of Mg-based materials for hydrogen production has attracted wide attention.Aiming at the problems of easy formation of inert oxide layer on its surface and the production of Mg(OH)2 to hinder the hydrolysis process,it is urgent to explore efficient,low-cost and green modification strategies.In this work,the green modification strategy for hydrolyzing hydrogen production of Mg-based materials was summarized,and the fast initial kinetics and high hydrogen production rate could be achieved by adjusting hydrolysis medium conditions and modifying Mg-based material.The significance of hydrolytic hydrogen production technology and device development for the realization of Mg-based hydrolytic hydrogen production was evaluated.Meanwhile,this work looks forward to the future direction of hydrogen production modification by hydrolysis of Mg-based alloy,and gradually optimizes the hydrolysis performance of industrial multi-component waste Mg alloy under the premise of green hydrogen production,and proposes the goal of efficient modification of waste Mg alloy,high-quality utilization of seawater,and low-cost and controllable hydrogen production process.
查看更多>>摘要：Corrosion is a pervasive phenomenon affecting materials across a multitude of scales,from the atomic to the macroscopic.This review paper presents a comprehensive examination of the methodologies employed in the analysis of magnesium corrosion,including electrochemical,non-electrochemical and analytical approaches,emphasizing the need for a diverse array of analytical tools to understand the complex interplay between corrosion,microstructure,and the dissolution mechanisms of magnesium alloys.The research showcases the utility of specific tools like SEM/EDS and SKPFM for targeted site analysis,while XPS and FTIR provide a broader perspective on specimen surfaces.The paper also discusses the value of in-situ analysis techniques,which allow for the real-time observation of corrosion processes,offering a dynamic view of the emergence and evolution of corrosion products.These in-situ methods stand in contrast to ex-situ analyses,which only permit post-experimental evaluation.By highlighting the capabilities of various analytical tools,from those that reveal surface layer details to those that probe deeper structures,and from those that detect primary elements to those that trace minute quantities of impurities,this study underscores the intricate nature of corrosion and the critical role of advanced analytical techniques in fostering a deeper understanding of material degradation.The findings advocate for the increased application of in-situ analysis in magnesium corrosion research,as it provides a more immediate and accurate depiction of corrosion dynamics,potentially leading to more effective corrosion prevention and control strategies.
查看更多>>摘要：Rechargeable magnesium-ion(Mg-ion)batteries have attracted wide attention for energy storage.However,magnesium anode is still limited by the irreversible Mg plating/stripping procedure.Herein,a well-designed binary Bi2O3-Bi2S3(BO-BS)heterostructure is fulfilled by virtue of the cooperative interface and energy band engineering targeted fast Mg-ion storage.The built-in electronic field resulting from the asymmetrical electron distribution at the interface of electron-rich S center at Bi2S3 side and electron-poor O center at Bi2O3 side effectively accelerates the electrochemical reaction kinetics in the Mg-ion battery system.Moreover,the as-designed heterogenous interface also benefits to maintaining the electrode integrity.With these advantages,the BO-BS electrode displays a remarkable capacity of 150.36 mAh g-1 at 0.67 A g-1 and a superior cycling stability.This investigation would offer novel insights into the rational design of functional heterogenous electrode materials targeted the fast reaction kinetics for energy storage systems.
查看更多>>摘要：The increasing demand for high-strength,corrosion-resistant magnesium alloys in transportation has led to the development of new processing techniques.In this work,cast and extruded ZK60 magnesium alloys were processed using the innovative solid-phase process,Friction Extrusion(FE).The microstructure was analyzed using Scanning Electron Microscopy(SEM),and Energy Dispersive Spectroscopy(EDS),showing a marked reduction in grain size,uniform solute distribution(Zn and Zr),and second phases after FE processing.Moreover,optical micrographs and Electron Backscatter Diffraction(EBSD)were employed to further evaluate the alloy microstructure.The corro-sion resistance and electrochemical behavior were analyzed using potentiodynamic polarization,Scanning Electrochemical Cell Impedance Microscopy(SECCIM),and atomic emission spectroelectrochemistry analysis(AESEC).Time evolution surface imaging and post-corrosion microstructures were also analyzed to support the understanding of underlying corrosion mechanisms.Corrosion initiation and propagation in FE-processed samples followed grain boundary patterns,differing from cast and extruded ZK60 behaviors.Electrochemical measurements and in-situ time-dependent optical imaging demonstrated that FE processing enhanced corrosion potential,reduced corrosion current,and increased cathodic activity.Additionally,FE processing reduced the disparity in pitting potential between cast and extruded samples,resulting in intermediate pitting potentials.Higher Mg and lower Zn dissolution was observed in the lower anodic currents for FE-processed samples.During aggravated anodic current cycles,Mg dissolution equalized,but the Zn/Mg dissolution ratio increased for FE-processed extruded samples,suggesting less cathodic activation and better resistance to further pitting.
查看更多>>摘要：A novel Mg-10Li-3AI(wt.％,LA103)matrix composite reinforced by ex situ micron TiB2 particles was developed in the present study.The ball milling and cold pressing pretreatment of the reinforcements made it feasible to prepare this material under stir casting conditions with good dispersion.The microstructure and mechanical properties of the composites prepared by different pretreatment methods were analyzed in detail.The TiB2 particles in the Al-TiB2/LA103 composite using the pretreatment process were uniformly distributed in the microstructure due to the formation of highly wettable core-shell units in the melt.Compared with the matrix alloys,the Al-TiB2/LA103 composite exhibited effective strength and elastic modulus improvements while maintaining acceptable elongation.The strengthening effect in the composites was mainly attributed to the strong grain refining effect of TiB2.This work shows a balance of high specific modulus(36.1 GPa·cm3·g-1)and elongation(8.4％)with the conventional stir casting path,which is of considerable application value.
查看更多>>摘要：The joining of different light metals through friction stir welding(FSW)is gaining interest as a method to decrease weight and improve fuel efficiency.However,to ensure durability,these welded metals may require surface treatments to protect against corrosion or wear.This study presents a novel approach for the simultaneous delivery of two distinct corrosion inhibitors to Ti-Mg dissimilar PEO treated joints on demand.The research focuses on the synthesis,characterization,and application of cerium@polystyrene(Ce@PS)nanocontainers,which are loaded with 8-hydroxyquinoline(8-HQ)to enhance corrosion protection.The synthesis involves several key steps,including the formation of a cerium-based outer layer around polystyrene nanospheres,the selective removal of the polystyrene core to create a porous structure,and the subsequent loading of the 8-HQ inhibitor.Structural and compositional analyses,conducted using scanning transmission electron microscopy(STEM)and energy-dispersive X-ray spectroscopy(EDS),confirmed the successful incorporation of 8-HQ within the nanocontainers.Additionally,Fourier-transform infrared spectroscopy(FTIR)provided detailed information about the chemical composition of the organic materials throughout the synthesis process.Thermal decomposition analysis verified the successful fabrication and stability of the dual-shell nanocontainers.Corrosion tests on Ti-Mg joints treated with plasma electrolytic oxidation(PEO)coatings and loaded nanocontainers demonstrated sig-nificantly improved corrosion resistance compared to untreated joints.This research highlights the potential of dual-shell nanocontainers,containing both organic and inorganic inhibitors,to offer prolonged corrosion protection,particularly against galvanic corrosion in dissimilar joints.The findings suggest that these synthesized nanocontainers hold promise for various industrial applications,particularly in the context of friction stir welded(FSW)Ti-Mg dissimilar joints,providing valuable insights for the development of advanced materials designed to mitigate corrosion.
查看更多>>摘要：In the present research,the NaF assisted plasma electrolytic oxidation(PEO)is designed to fabricate the high-content ZnO nanoparti-cles doped coating on AZ31B alloy.The microstructure,phase constituents and corrosion behavior of the PEO coatings are investigated systematically.The results reveal that the introduction of NaF promotes the formation of MgF2 nanophases in the passivation layer on Mg alloy,decreasing the breakdown voltage and discharge voltage.As a result,the continuous arcing caused by high discharge voltage is alleviated.With the increasing of NaF content,the Zn content in the PEO coating is enhanced and the pore size in the coating is decreased correspondingly.Due to the high-content ZnO doping,the PEO coating protected AZ31B alloy demonstrates the better corrosion resistance.Compared with the bare AZ31B alloy,the high-content ZnO doped PEO coated sample shows an increased corrosion potential from-1.465 V to-1.008 V,a decreased corrosion current density from 3.043 × 10-5 A·cm-2 to 3.960×10-8 A·cm-2 and an increased charge transfer resistance from 1.213×102 ohm·cm2 to 2.598×105 ohm.cm2.Besides,the high-content ZnO doped PEO coated sample also has the excellent corrosion resistance in salt solution,exhibiting no obvious corrosion after more than 2000 h neutral salt spraying and 28 days'immersion testing.The improved corrosion resistance can be ascribed to the relative uniform distribution of ZnO in PEO coating which can transform to Zn(OH)2 and form a continuous protective layer along the corrosion interface.
查看更多>>摘要：This study investigates the effect of the deformation mode on the precipitation behavior of an extruded Mg-8.0Al-0.5Zn-0.2Mn(AZ80)alloy.The alloy samples are compared after the application of 3.5％tension and 3.5％compression along the extrusion direction to induce slip-dominant and twinning-dominant deformation modes,respectively.The pre-compressed(PC)sample,which contained numerous { 10-12}tension twins,has a reduced grain size and a higher internal strain than the pre-tensioned(PT)sample,which is attributed to the inherent internal strain that occurs during the formation and growth of the twins.As a result,the precipitation behavior of the PC sample is accelerated,leading to its short peak aging time of 32 h,which is lower than those of the PT and as-extruded samples(48 and 100 h,respectively).Furthermore,fine continuous precipitates(CPs)rapidly form within the { 10-12} twins,contributing to the enhanced hardness.Discontinuous precipitates(DPs),which have a hardness comparable to the CP-containing twinned regions,in the PC sample experience less coarsening during aging than those in the PT sample due to growth inhibition by the {10-12} twins.Ultimately,the {10-12} twins generated under the twinning-dominant deformation condition lead to enhanced precipitation behaviors,including the preferential formation and refinement of CPs and the suppressed coarsening of DPs.Consequently,pre-deformation that occurs {10-12} twinning exhibits more pronounced effects on precipitation acceleration and microstructural modification than slip-inducing pre-deformation.
万方数据
维普