包装工程2012,Vol.33Issue(23) :25-29.

PCL/纸板复合膜的包装特性及回收工艺研究

Study of Packaging Characteristics and Recycling Process of PCL/Paper- board Composite Film

李梦婷 赵子龙 施璨灿 靳烨 孙文秀 杨进军 董同力嘎
包装工程2012,Vol.33Issue(23) :25-29.

PCL/纸板复合膜的包装特性及回收工艺研究

Study of Packaging Characteristics and Recycling Process of PCL/Paper- board Composite Film

李梦婷 1赵子龙 1施璨灿 1靳烨 1孙文秀 1杨进军 2董同力嘎1
扫码查看

作者信息

  • 1. 内蒙古农业大学,呼和浩特010018
  • 2. 天津理工大学,天津300384
  • 折叠

摘要

为了提高纸板的力学性能和水蒸气阻隔性,采用热压法制备了聚己内酯(PCL)/纸板双层复合膜。分别使用质构仪、动态力学分析仪、透湿仪对材料的力学性能、动态热力学性能以及阻隔性能进行了评价,并对PCL的热封性能和纸板的回收工艺进行了评估。研究表明,与PCL复合后,纸板的拉伸强度提高了约3倍,弹性模量提高了约5倍。阻湿性也显著提高;PCL的复合量和热封温度对材料的热封强度影响较大;纸板回收速度快,平均回收率可达到99%。

Abstract

In order to improve the mechanical property and water vapor barrier property of paperboard, PCL/Paper- board bilayer film was prepared through thermo-compression technique. Tensile test, dynamic mechanical analysis (DMA) and water vapor permeability (WVP) test were conducted to assess the mechanical, thermodynamics and bartier behavior of the film before and after laminating. Heat-seal property of PCL and recycling test of paperboard was also explored. The results showed that the tensile strength of bilayar film is improved by 3 times, Young' s modulus is improved by 5 times, and water vapor barrier property increases significantly after PCL laminating by comparison with the paperboard; content of PCL and platen temperature has significant influence on seal strength; paperboard recycling is fast and the average recovery is 99% .

关键词

纸板/机械性能/水蒸气透过性/热封/回收

Key words

paperboard/mechanical property/water vapor permeability/heat-seal/recycling

引用本文复制引用

基金项目

内蒙古高等学校科学研究项目(NJZYl1058)

出版年

2012
包装工程
中国兵器工业第五九研究所

包装工程

CSCD北大核心
影响因子:1.097
ISSN:1001-3563
被引量1
参考文献量3
段落导航相关论文