预烧、磨料、烧结工艺对低温共烧NiCuZn铁氧体结构及磁性能的影响

Effects of pro-firing,ball-milling,and sintering process on the microstructure and magnetic properties of low temperature co-fired NiCuZn ferrite materials

孙小龙 ¹杨陆 ¹刘兴 ¹许淑容 ¹王雨 ¹董鑫 ¹何超 ¹武文杰 ¹李奇¹

扫码查看

作者信息

1. 西南应用磁学研究所,四川绵阳 621000
折叠

摘要

采用氧化物陶瓷工艺制备低温共烧NiCuZn软磁铁氧体材料,考察了预烧温度、球磨时间、烧结温度等工艺条件对材料微观结构和磁性能的影响.结果表明,随球磨时间延长、预烧温度增高,NiCuZn铁氧体材料磁导率、饱和磁通密度先增大后减小,功耗则先减小后增大;随烧结温度升高,材料磁导率、饱和磁通密度不断增大,功耗先降低后增高.当预烧温度为860℃、球磨时间6h、烧结温度为900℃时,晶粒尺寸在1～2μm之间、大小均匀、结构致密,材料磁导率为465、饱和磁通密度为306 mT、功耗为46.5 kW/m3,综合磁性能最佳.

Abstract

NiCuZn soft magnetic ferrite was prepared by oxide ceramic process.The effects of pre-firing temperature,ball milling time and sintering temperature on the microstructure and magnetic properties of the material were investigated.The results show that with prolonging milling time and increasing prefiring temperature,the permeability and saturation flux density of LTCF materials increase firstly and then decrease,it is contrary to the trend of power consumption.With the increase of sintering temperature,the material permeability and saturation magnetic induction increase,and the power loss decreases first and then increases.When the pre-firing temperature is 860 ℃,the milling time is 6 h,and the sintering temperature is 900 ℃,material with uniform grain size of 1 to 2 μm,,dense microstructure was prepared,with the best comprehensive magnetic property.

关键词

NiCuZn铁氧体/低温共烧/工艺条件/磁性能

Key words

NiCuZn ferrite/magnetic properties/low temperature co-firing/process conditions

引用本文复制引用

出版年

2024

磁性材料及器件

中国西南应用磁学研究所

磁性材料及器件

影响因子：0.358

ISSN：1001-3830

段落导航