首页|Ce3+掺杂Ba3Y2(BO3)4荧光粉发光性能及应用

Ce3+掺杂Ba3Y2(BO3)4荧光粉发光性能及应用

扫码查看
采用高温固相法制备了Ce3+掺杂的Ba3Y2(BO3)4荧光粉.通过X射线衍射谱测定样品的晶体结构,研究了样品的激发和发射光谱、荧光衰减曲线、色坐标和变温光谱.在紫外光的激发下,Ce3+掺杂的Ba3Y2(BO3)4荧光粉发出明亮的蓝光,发射峰中心位于420 nm附近,半高宽大于83 nm.随着Ce3+离子掺杂浓度增加,样品的发光强度先增强后减弱.随着Ce3+掺杂浓度变化,样品CIE坐标变化较小,说明样品色彩稳定性好.随温度的升高,样品的发光强度降低,样品的热稳定性有待提高.把样品和商粉结合365 nm芯片制成白光LED,其色坐标为(0.33,0.39),显色指数为92.6,色温为5 570 K.结果表明,Ba3Y2(BO3)4∶Ce3+荧光粉是一种新型的可用于白光LED的宽带发射蓝色荧光粉.
Luminescence Properties and Application of Ce3+Doped Ba3 Y2(BO3)4 Phosphor
Ce3+doped Ba3Y2(BO3)4 phosphors were synthesized by the solid-state reaction technique.The crystal structure was analyzed by the X-ray diffraction patterns.The photoluminescence excitation and emission spectra,photoluminescence decay curves,the CIE coordinates and temperature dependent emission spectra were studied.The bright blue emission of Ba3Y2(BO3)4∶Ce3+phosphors peaks around 420 nm was observed under the UV excita-tion,the full width at half maximum is over 83 nm.The integrated luminescence intensities increase first and then decrease with increasing Ce3+concentration.The CIE coordinates of the samples with the increasing of Ce3+concen-tration change slightly,indicating that the color stability of the samples was excellent.With the temperature increas-ing the emission intensity of samples decreased,the thermal stability of the sample needs to be improved.A white LED was fabricated by using a 365 nm LED chip combined with Ba3Y2(BO3)4∶Ce3+phosphor and commercial phos-phor,the CIE was(0.33,0.39),CCT was 5 570 K,and Ra was 92.6.These results indicated that Ba3Y2(BO3)4∶Ce3+phosphor could be as a blue broad emission band LED phosphor.

phosphorCe3+dopedwhite LED

孙晓园、刘椿淼、李敏、田宛鹭、娄文静、李昊翔、谭琴琴、李诚、骆永石

展开 >

长春师范大学 物理学院,吉林 长春 130032

中国科学院长春光学精密机械与物理研究所 特种发光科学与技术重点实验室,吉林 长春 130033

荧光粉 Ce3+掺杂 白光LED

2024

发光学报
中国物理学会发光分会,中国科学院长春光学精密机械与物理研究所

发光学报

CSTPCD北大核心
影响因子:1.301
ISSN:1000-7032
年,卷(期):2024.45(12)