首页|FeCrAl-ODS钢的辐照位错环演变及其辐照硬化效应

FeCrAl-ODS钢的辐照位错环演变及其辐照硬化效应

扫码查看
为了研究FeCrAl-ODS钢的抗辐照性能,采用原位离子辐照方法研究了 FeCrAl-ODS钢辐照过程中位错环的演变,采用纳米硬度表征了 FeCrAl-ODS钢的辐照硬化效应.研究结果表明:经离子辐照后,FeCrAl-ODS钢中产生了<100>和1/2<111>位错环,位错环的平均直径和位错环数密度都随辐照损伤剂量的增大而增大.随辐照温度的升高,位错环的生长速率增大而数密度有所降低.经10dpa离子辐照后,FeCrAl-ODS钢的辐照硬化值仅为0.35 GPa.相比FeCrAl合金,FeCrAl-ODS钢具有较好的抗辐照硬化性能.
Study on the evolution of dislocation loops and radiation hardening effect in FeCrAl ODS steel
In order to study the radiation resistance of FeCrAl ODS steel,the evolution of dislocation loops in Fe-CrAl ODS steel under irradiation was studied using in-situ ion irradiation method,and the irradiation hardening effect of FeCrAl ODS steel was characterized using nanohardness.The research results indicate that after ion irra-diation,FeCrAl ODS steel produces<100>and 1/2<111>dislocation loops,and the average diameter and density of dislocation loops increase with the increase of irradiation damage dose.As the irradiation temperature increas-es,the growth rate of dislocation loops increases while the number density decreases.After 10 dpa ion irradia-tion,the irradiation hardening value of FeCrAl ODS steel is only 0.35 GPa,indicating good resistance to irradia-tion hardening.

FeCrAl ODS steelion irradiationdislocation loopsnanohardnessirradiation hardening

龙弟均、徐海波、孙永铎、吕俊男

展开 >

中国核动力研究设计院,四川成都 610041

中国核工业集团有限公司,北京 100822

FeCrAl-ODS钢 离子辐照 位错环 纳米硬度 辐照硬化

中国核工业集团"青年英才"计划

NPIC-K301007033

2024

粉末冶金工业
中国钢研科技集团有限公司 中国钢协粉末冶金分会 中国机协粉末冶金分会

粉末冶金工业

CSTPCD北大核心
影响因子:0.406
ISSN:1006-6543
年,卷(期):2024.34(3)