首页|植筋UHPC-NC界面直剪试验研究及有限元模拟

植筋UHPC-NC界面直剪试验研究及有限元模拟

扫码查看
目前,超高性能混凝土(UHPC)被广泛用于组合构件和普通混凝土(NC)结构的加固.在加固后,由于界面法向拉应力和界面切向剪应力的共同作用,UHPC与NC之间的界面成为最脆弱的部分.植筋处理是连接旧混凝土与新混凝土界面的常见方法.本研究通过直剪试验和有限元模拟综合分析了有无植筋的UHPC-NC试件的抗剪强度以及植筋率对抗剪性能的影响.结果表明,无植筋试件的抗剪强度仅为整体浇筑试件的20%,而植筋试件的抗剪强度为整体浇筑试件的40%~80%.在未植筋试件中,破坏形式呈脆性破坏,而在植筋试件中,界面裂缝得到发展,界面抗剪强度提高,界面滑移量增大,界面呈延性破坏.
Straight Shear Test and Finite Element Simulation of UHPC-NC Interface with Reinforcement Planting
At present,ultra-high performance concrete(UHPC)is widely used for reinforcement of composite members and normal concrete(NC)structures.After reinforcement,the interface between UHPC and NC becomes the most vulnerable part due to the combined effect of interface normal tensile stress and interface tangential shear stress.Reinforcement planting treatment is a common method to connect the interface between old concrete and new concrete.In this study,the shear strength of UHPC-NC specimens with and without reinforcement planting and the effect of reinforcement rate on shear performance were comprehensively analyzed by straight shear test and finite element simulation.The results show that the shear strength of specimens without reinforcement planting is only 20%of that of integrally cast specimens,while the shear strength of the reinforcement planting specimens could reach 40%to 80%.In specimens without reinforcement planting,the damage form is brittle damage.In reinforcement planting specimens,the development of interface cracks is controlled,the interface shear strength is improved,the slip of interface slip is increased,and the interface is ductile failure.

UHPCnew and old concretereinforcing bar reinforcementbond surfaceshear propertyreinforcement rate

鲜雪蕾、林梦凯、陈天明、王大宁

展开 >

兰州交通大学土木工程学院,兰州 730070

UHPC 新老混凝土 植筋加固 粘结面 剪切性能 植筋率

甘肃省自然科学基金甘肃省高等学校创新能力提升项目

22JR5RA3342019B-055

2024

硅酸盐通报
中国硅酸盐学会 中材人工晶体研究院

硅酸盐通报

CSTPCD北大核心
影响因子:0.698
ISSN:1001-1625
年,卷(期):2024.43(6)