Preparation and Microanalysis of Geopolymer Low-Strength Grouting Material Based on Self-Combusting Gangue
With self-combusting gangue as raw material,fly ash and low dosage of composite Portland cement P·C 42.5 as supplementary materials,geopolymer low-strength grouting materials based on self-combusting gangue were prepared by the excitation of calcium carbide slag,and the samples were microscopically analyzed.The experimental results show that when the amount of calcium carbide slag mixing(9.65%,mass fraction)is the same,the compressive strength development of samples is more favorable when the mass ratio of gangue,fly ash and cement is set to 5∶3∶2 or 5∶2∶3,the geopolymerization of the sample system is higher and the compressive strength(55 d)increases by 70%~86%compared to the samples with mass ratio of 7∶2∶1 and 7∶1∶2.At the same time,compared with the samples without adding desulfurization gypsum,adding 20%(mass fraction)desulfurization gypsum greatly improves the compressive strength of samples during the whole process of curing,and the compressive strength(55 d)increases by 21%~50%.The combination of correlation,XRD,SEM and FTIR analyses indicate that the main hydration products of samples are ettringite,C-S-H gel,C-A-S-H amorphous gel and others,and the compressive strength of samples is mainly derived from the C-A-S-H amorphous gels produced by geopolymerization.