首页|响应面法优化钛白废酸还原浸出硫酸烧渣的条件研究

响应面法优化钛白废酸还原浸出硫酸烧渣的条件研究

扫码查看
原文链接
  • NETL
  • NSTL
  • 万方数据
采用Box-Behnken设计的响应面法,选取铁粉用量、还原时间和浸出温度三个变量,研究并优化了钛白废酸还原浸出硫酸烧渣的浸出条件.建立了拟合效果较好的浸出条件的预测模型,以预测浸出率或优化浸出变量值.回归方程模型显著可靠,相关系数R2为0.996 1.浸出条件对反应平衡、浸出物溶解度及反应体系性质等有重要影响,其中铁粉用量与浸出温度的协同交互作用影响最大.验证试验表明,在铁粉用量10.347 g、还原时间2 h、浸出温度88℃的最佳条件下,浸出率可达83.63％以上.
Optimization of reduction leaching conditions for pyrite cinder using titanium dioxide waste acid by response surface methodology
The reduction leaching conditions for pyrite cinder leaching by titanium dioxide waste acid were investigated and optimized,using the response surface methodology designed by Box-Behnken method,and the iron powder dosage,reduction time,and leaching temperature were selected as the three variables.The established predictive model for leaching conditions was with good fitting results to predict leaching yields or optimize leaching variable values.The regression equation model was signi-ficantly reliable,with a correlation coefficient R2 of 0.9961.The leaching conditions had important ef-fects on the leaching reaction equilibrium,solubility of leached materials,and properties of reaction sys-tems,among which the synergistic interaction between iron powder dosage and leaching temperature had the greatest impact.The verification experiments confirmed that the leaching yield values could be achieved over 83.63％under the optimal conditions,with the iron powder dosage of 10.347 g,reduction time of 2 h and leaching temperature of 88 ℃.

titanium dioxide waste acidpyrite cinderreduction leachingsynergistic interactionre-sponse surface methodology

王青鸿、田从学、吴秀坤

展开 >

攀枝花学院钒钛学院,四川攀枝花 617000

钛白废酸 硫酸烧渣 还原浸出 协同交互作用 响应面法

攀西试验区第六批科技攻关项目四川省科技成果转化示范项目四川省科技计划转移支付专项四川省科技计划转移支付专项四川省科技服务业示范项目四川省科技成果转移转化示范项目

川财建[2022]390号1-923ZHSF023722ZYZF-GG-0222ZYZF-GG-052022KJFWYSF-124ZHSF0230

2024

10.7513/j.issn.1004-7638.2024.03.015

钢铁钒钛
攀钢集团攀枝花钢铁研究院有限公司

钢铁钒钛

CSTPCD北大核心
影响因子：0.395
ISSN：1004-7638
年,卷(期)：2024.45(3)
  • 5